Gearbox CU, CU
| Price: | negotiated |
| Company: | globalreductor@mail.ru |
| Seller: |  Lavrov Georgij |
| Phones: |  096-194-99-98 Show phone |
| Address: | Ukraine, Kharkivs'ka Oblast', Kharkiv |
THE CYLINDRICAL THREE-ZU (TSU) AND ZN (CN)
Gearbox CU, CU
the three-step
narrow, is used in the drives of various machines and mechanisms for change
torque and speed.
The operating conditions of the cylindrical
a three narrow horizontal General engineering applications
TU-160, TU-200, CW-250, CU-315, CU-355 and CU-400:
- work lasting up to 24 hours. a day or
periodic stops;
- work in continuous and intermittent
modes, i.e., when variable loads with periodic stops loading
one direction and reversible;
- speed high-speed shaft is not more than
1500 rpm;
the rotation of the shaft in either direction;
- non-aggressive environment, the atmosphere of the types I and II
GOST 15150 if airborne dust is not more than 10 mg/m3;
climatic version - U1, U2, UZ, NF-4,
T1, T2, T3 and O4 according to GOST 15150.
Basic technical data.
Technical characteristics of the gears shown in the table.
When the reverse mode of operation and in the case of gear mechanisms
increased responsibility permissible torque on the low speed shaft
should be reduced by 30%.
The values of the admissible radial cantilever loads on low speed shaft for
gearbox options Assembly 13, 23, 33 and the high-speed shaft gear
with the variants of the Assembly 31, 32, 33, 36 should be reduced by 50%.
