Lab supplies in the store "Encotel Systems"

Laboratory power supplies must be highly reliable, high limit adjust output current and voltage, as well as a multistage protection. We recommend you to purchase a lab supply in the store. The proposed model meets all these requirements and is made with the most modern engineering and design solutions in this area.

Used laboratory power supply to provide power to the subjects of the pilot schemes. But more often they are used to power laboratory equipment, especially if the voltage level of the required standard. Many current models are going for the pulse circuit. It provides the high efficiency of the device, and saving internal elements: transformer, smoothing capacitors. Modern switching power supplies for laboratories, to provide a level of ripple below 10 mV. For many precision devices this is too much, which forces to use linear power supplies. The level of pulsations are below one millivolt.

Linear power supplies are used in labs to power precision devices, often measuring devices and electronic equipment. Since the linear regulator has low efficiency, the power of such units does not exceed 400 watts.

Connected to the power supply equipment may be damaged by knocking down the settings of the output voltage. To prevent such situations it's always the display and protection of over-current, plus voltage indication and short circuit protection. Input circuit 220 is protected by the varistors.

The accuracy of the output voltage varies from 0.1 to 0.01 volts (10 mV). Setting the trip level overcurrent protection — 0.1% and above. Currents greater than 10 And it is advisable to obtain from multi-channel power supplies. Most of the models contains three channels, which is more than enough to power laboratory equipment. All three channels are completely electrically isolated from the mains and from each other. It provides security and the possibility of both parallel and serial connection of channels.