Sell management system sedevacantism machine Rabitz

System description management sedevacantism machine Rabitz

1.Control spindle drive - single-phase frequency Converter 2,2 kW (3. C) allowing accurate stop and hold the spindle in front of the segments of wire at the end of the cycle.

2. The power savings compared to machine without PE, using reverse for exact stop, 1.5 times.Confirmed by measurement meter is working in the shop ( before and after the upgrade)

3.The ability to control the parameters of the spindle :

- stepless the speed of rotation directly from the control panel

- speed ramp ( used for weaving fine wire)

- adjust length of brake path when setting up directly from the PLC

4.Sets the width of the roll of a single parameter

5.Built-in counter of finished products

6.Use only proximity sensors (4 PCs.)

7.Control input / output signals on the screen display.

8.Operating modes:

- cut ( only when the zero position of the spindle for avoid tool breakage and shear)

- single ( after knitting a spiral one - stop)

- automatic ( continuous operation to the preset the length of the roll)

- the ability to stop the Stop button without losing the settings cycle

9.Control of wire feeding delay

10. The built-in node control PREROLL roll

11.Button * -1* to reduce meter reading spirals per unit

12.The possibility of installing on any machine in agreement RS with the customer.Exceptional ease of repair. The use of the design only the standard components. Delivered high quality clear documentation. Safe installation, simple connection, technical support, no breakdowns within 2 years in different places of Ukraine and abroad - all this leaves a good impression among customers