Kotli electrode ion heating boiler,ion boiler,electrode
Offer type: salePublished: 21.02.2016
| Price: | 2 300 UAH |
| Seller: |  Naumchuk Roman Oleksandrovich |
| Phones: |  0978643092 Show phone |
| Address: | Ukraine, Rivnens'ka Oblast' |
FEATURES ENERGY-EFFICIENT ELECTRODE BOILER "ESG"
Electrode boilers - ion type is the best solution for independent heating for the house. "ESG" has a number of significant advantages:
• optional sensor automatic temperature control heating;
• Close to the efficiency (98-99%);
• low inertia allows you to quickly start the heating to the desired temperature, and effectively using automatic control system;
• low sensitivity to power surges - when the voltage is changing only the capacity of the heating installation, but his work continues;
• electrode boiler has a relatively small size;
• low power consumption - coolant heated for a few minutes in full volume;
• does not require consent for installation and operation of boiler inspection authorities.
Electrode boiler "ESG" is an installation flow-type (without intermediate components). The heating fluid is obtained due to leakage of electric current through the coolant. The action of heating occurs due to the disordered motion of ions of carrier liquid from the cathode to the anode with a frequency of 50 vibrations per second (hence the second name of electric boilers ion, boilers). Chaotic motion of ions leads to the most rapid increase in coolant temperature.
Electric ion boilers "ESG" have the following advantages:
• layering of solid deposits (scale) on the electrodes and the walls of the boiler does not lead to degradation of the electrodes themselves or of the unit as a whole, but only weakens its power.
• Included ion the boiler in the "dry run" (no coolant in the boiler, in consequence of leakage) is absolutely safe, there is no conductor between the cathode and the anode there is no heating , and the boiler fails.
• observed the processes of oxidation due to the frequent change of polarity of the electrodes (anode to cathode).
Electric flow-type "ESG" is much more compact than Tenovye. Electrode boilers are leaders in the field of energy-saving technologies, energy Class A. the Warranty period of 3 years, but actually "ESG" can be used for at least 10 years, thanks to the very robust design. New alloy electrode, which is produced with the latest technology allows it to operate up to 30 years. The popularity of the electrode Autonomous heating systems of residential houses has increased in the last five years, three times due to its efficiency and the ratio quality - price.
Ion boilers have another indisputable advantage in comparison with their "competitors" - they do not require retrofitting of existing heating systems , and are easy to install in the finished heating.
Features of electrode boilers:
1. One kilowatt of power "ESG" heats 60 cubic meters or (20 sq m with a ceiling height up to 3 m)
2. The duration of "ESG" in a hot water heating system from 1 to 8 hours depending on the ambient temperature (automatic operation with sensor-relay of temperature), so when the heating area from 40 to 750 sq. m. electricity consumption per day ranges from 2 to 288 kW / h
(depending on the modifications, see table of characteristics).
4. "ESC" during operation in hot water heating system provides heated coolant rise to a height of from 3 to 24 meters (depending on modification), due to the large temperature difference at the inlet and outlet of the electrical installation, allows you to heat a single story and multistory buildings without the use of circulation pumps.
5. "ESG" is suitable for different types of water heating systems.
6. Input and output "ESG" is mounted in the water heating system through plumbing couplings, plumbing adaptors plumbing or hoses.
7. In a water heating system where is already installed a boiler (boilers), "ESG" is mounted parallel to the boiler (boilers).
In the included "STANDARD"
1. Energy saving heating installation "ESG" - 1 PC.
2. Temperature thermostat - 1 PCs.
3. Passport (manual) - 1 PC.
Electrode boilers - ion type is the best solution for independent heating for the house. "ESG" has a number of significant advantages:
• optional sensor automatic temperature control heating;
• Close to the efficiency (98-99%);
• low inertia allows you to quickly start the heating to the desired temperature, and effectively using automatic control system;
• low sensitivity to power surges - when the voltage is changing only the capacity of the heating installation, but his work continues;
• electrode boiler has a relatively small size;
• low power consumption - coolant heated for a few minutes in full volume;
• does not require consent for installation and operation of boiler inspection authorities.
Electrode boiler "ESG" is an installation flow-type (without intermediate components). The heating fluid is obtained due to leakage of electric current through the coolant. The action of heating occurs due to the disordered motion of ions of carrier liquid from the cathode to the anode with a frequency of 50 vibrations per second (hence the second name of electric boilers ion, boilers). Chaotic motion of ions leads to the most rapid increase in coolant temperature.
Electric ion boilers "ESG" have the following advantages:
• layering of solid deposits (scale) on the electrodes and the walls of the boiler does not lead to degradation of the electrodes themselves or of the unit as a whole, but only weakens its power.
• Included ion the boiler in the "dry run" (no coolant in the boiler, in consequence of leakage) is absolutely safe, there is no conductor between the cathode and the anode there is no heating , and the boiler fails.
• observed the processes of oxidation due to the frequent change of polarity of the electrodes (anode to cathode).
Electric flow-type "ESG" is much more compact than Tenovye. Electrode boilers are leaders in the field of energy-saving technologies, energy Class A. the Warranty period of 3 years, but actually "ESG" can be used for at least 10 years, thanks to the very robust design. New alloy electrode, which is produced with the latest technology allows it to operate up to 30 years. The popularity of the electrode Autonomous heating systems of residential houses has increased in the last five years, three times due to its efficiency and the ratio quality - price.
Ion boilers have another indisputable advantage in comparison with their "competitors" - they do not require retrofitting of existing heating systems , and are easy to install in the finished heating.
Features of electrode boilers:
1. One kilowatt of power "ESG" heats 60 cubic meters or (20 sq m with a ceiling height up to 3 m)
2. The duration of "ESG" in a hot water heating system from 1 to 8 hours depending on the ambient temperature (automatic operation with sensor-relay of temperature), so when the heating area from 40 to 750 sq. m. electricity consumption per day ranges from 2 to 288 kW / h
(depending on the modifications, see table of characteristics).
4. "ESC" during operation in hot water heating system provides heated coolant rise to a height of from 3 to 24 meters (depending on modification), due to the large temperature difference at the inlet and outlet of the electrical installation, allows you to heat a single story and multistory buildings without the use of circulation pumps.
5. "ESG" is suitable for different types of water heating systems.
6. Input and output "ESG" is mounted in the water heating system through plumbing couplings, plumbing adaptors plumbing or hoses.
7. In a water heating system where is already installed a boiler (boilers), "ESG" is mounted parallel to the boiler (boilers).
In the included "STANDARD"
1. Energy saving heating installation "ESG" - 1 PC.
2. Temperature thermostat - 1 PCs.
3. Passport (manual) - 1 PC.
