Doughnuts machine B4-58
Offer type: salePublished: 22.02.2016
| Price: | negotiated |
| Company: | Prodtehmash |
| Seller: |  Prodtehmash Viktor Valerievich |
| Phones: |  0957566282 / 0567880292 Show phone |
| Address: | Ukraine |
Doughnuts machine B4-58 is designed for dividing and forming of blanks of dough of different types of doughnuts products
Working principle:
The dough in the form of separate pieces is loaded into the receiving hopper, where the rollers is fed into a test chamber. in the rear wall of the test chamber are installed, the pistons receiving the punch through the lever and pull reciprocating motion of the University entry. To the opposite (anterior) wall of the test chamber is installed a cylindrical sleeve. when the forward movement of the pistons the dough in the chamber is compacted, and after entering in the liner vypressovyvaetsya through the annular gap formed by the sections of the sleeves and rolling pins, in the form of ring-shaped workpieces.
Regulation of the mass of the workpieces is carried out by changing the stroke of the pistons by means of the screw.
After feeding the necessary amount of the test pistons are returned to the rearmost position to dwell, and forming the cups start moving.
When the movement of the forming glasses forward exempt circular knives, which under the action of the spring, moving down forward, cut off the workpiece from the total weight of the dough, with a little sliding them forward on the rolling pin, and hit sepectacular. The process of running the test workpiece is a three-time reciprocating movement of the cups along the rolling pins.
Working principle:
The dough in the form of separate pieces is loaded into the receiving hopper, where the rollers is fed into a test chamber. in the rear wall of the test chamber are installed, the pistons receiving the punch through the lever and pull reciprocating motion of the University entry. To the opposite (anterior) wall of the test chamber is installed a cylindrical sleeve. when the forward movement of the pistons the dough in the chamber is compacted, and after entering in the liner vypressovyvaetsya through the annular gap formed by the sections of the sleeves and rolling pins, in the form of ring-shaped workpieces.
Regulation of the mass of the workpieces is carried out by changing the stroke of the pistons by means of the screw.
After feeding the necessary amount of the test pistons are returned to the rearmost position to dwell, and forming the cups start moving.
When the movement of the forming glasses forward exempt circular knives, which under the action of the spring, moving down forward, cut off the workpiece from the total weight of the dough, with a little sliding them forward on the rolling pin, and hit sepectacular. The process of running the test workpiece is a three-time reciprocating movement of the cups along the rolling pins.
