Decentral recuperator of Climtec rd-150

Description recovery systems and ventilation CLIMTEC RD-150

 

Supply and exhaust ventilation system — the heat exchanger CLIMTEC The RD-150 is a work module (monoblock) standard diameter of 150 mm. Mounted in the upper module part of the wall bordering the street. Of mounting through holes on outside diameter 160-180 mm in which a mounting foam or other sealant the unit of work is set at an angle =3-5° down in the street. Prominent remain the grille: anemostat indoors and grille on facade.

Advantage ventilation CLIMTEC is an innovative method of saving heat, thanks the use of aluminum heat exchangers with a total surface heat transfer up to 3 m2 with opposing, non-intersecting streams of air, as you know the aluminum is not oxidized (does not have effects on the respiratory tract person), has its own oxide layer which prevents the development fungal bacteria, has a wide temperature range of application).

 

System ventilation is connected to the fixed network with a voltage of 220 V and frequency 50 Hz.

Consumed power 28 watts/hour.

Installation ventilation system — heat exchanger CLIMTEC The RD-150 in the apartment, house or office the room will create the normal air exchange that will lead to normalization humidity, remove the damp and smell of dampness, will create a favorable conditions for breath, as the amount of carbon dioxide in the room will always normal .

I You will be simultaneously supply and exhaust ventilation with minimum heat losses that will create a healthy indoor climate and comfort conditions, when excluding the development of mold and fungal bacteria.

Level noise at a distance of 3 m with a maximum working modes does not exceed 38 dB. In mode "Night" – 24 dB.

System ventilation designed for continuous operation at room temperature + 5°C to + 35°C and outside air temperature from -20°C to + 45°C. For the extension of the temperature range and less than -25 °C is possible additional installation options "mini heater", power power is increased by 30 watts/hour.

Also the system provides additional option, air filtration ( charcoal filter or the coarse filter).

System ventilation also allows you to smoothly adjust the speed of vozdukhovody.

 

 

Specifications:

· Diameter of the working module - 150mm.;

· Length from 450 to 1000 mm;

· Efficiency - 87%;

· Inflow volume - 105 m3 /h;

· Flow rate is 105 m3 /h;

· Night mode — 25 % from the nominal values of 27 m3 /hour;

All models have rheostat (Dimmer) or a remote (RC) control. Also provided the system of centralized control of two or more recuperators CLIMTEC RD-150

Ventilation system – the heat exchanger CLIMTEC RD-150 — designed for use in homes and buildings with thick load-bearing walls from 400mm.

 

Package contents:

· ventilation system - heat exchanger – 1 PCs.;

· passport – 1 PCs.;

· packing box – 1 PC.;

· remote control — 1 PCs. (for models DN)

· remote mechanical control — 1pc. (for modules with Dimmer)

 

 

Maintenance

 

Technical maintenance of the ventilation system is to periodically (at least times a year) cleaning of the surfaces of the fan and the heat exchanger from dust and dirt.

Retention rules

The term device usage unlimited, it has no electric devices in addition to the fans.

Warranty the period is 2 years.

 

Manufacturer the ventilation system guarantees the normal operation of the product within 24 months from the date of sale, subject to the conditions of storage, transportation, installation and operation.

In the absence of a mark about sale date of the product warranty period is calculated with the date of manufacture.

Warranty the obligations of the manufacturer are not subject to the ventilation system, mechanically damaged.

In case of any violations in the work of the recuperator because of the manufacturer during the warranty period, the consumer has the right for free repair of