Compressor repair 2ВМ4-24/9, compressor Repair 2ВМ4-27/9, compressor Repair 2ВМ4-12/65

compressor repair 2ВМ4-12/65М1ремонт compressors reciprocating air 2ВМ4-12/65М1
current repair of reciprocating compressors 2ВМ4-12/65М1
of maintenance, every 2500-3000 hours worked:
inspection, cleaning of a Deposit, washing, purging, drying ― working valves
checking, at the point where the replacement of components of the stuffing box
flushing the lubricator and oil filtratrion compressor 2ВМ4-24/9ремонт compressors reciprocating air 2ВМ4-24/9
current repair of reciprocating compressors 2ВМ4-24/9
of maintenance, every 2500-3000 hours worked:
inspection, cleaning of a Deposit, washing, purging, drying ― working valves
checking, at the point where the replacement of components of the stuffing box
flushing the lubricator and oil filters
the purge system compressor smaskarenhet 2ВМ4-27/9ремонт air compressors reciprocating 2ВМ4-27/9
current repair of reciprocating compressors 2ВМ4-27/9
of maintenance, every 2500-3000 hours worked:
inspection, cleaning of a Deposit, washing, purging, drying ― working valves
checking, at the point where the replacement of components of the stuffing box
flushing the lubricator and oil filters
purging of the lubrication system
check all threaded connections compressor
to check the mirror cylinder through a valve box
to clean, rinse, dry and lubricate cell air filter
check gaps, if necessary, the adjustment between the shoes
(slide) and crosshead guides of the frame
checking, adjusting linear dead spaces of the cylinder-piston group
inspection, adjustment of safety valves
oil change in the lubrication of the crank mechanism
check, if necessary replace piston rings
check gap, replace if necessary, between the needle bearing
and wrist pin
check the clearances of the bottom head of a rod
check the connecting rod bolts with a measurement of the elongation
check, if necessary replace the main bearings of the crankshaft
to check the devices of emergency protection
medium repair of air compressors reciprocating 2ВМ4-27/9
conduct medium repair every 5000-6000 hours worked:
the complete sequence of this repair, with the addition of works
check of a technical condition with the definition of performance and
the power consumption of the compressor
full disassembly of the compressor
inspection, cleaning of a Deposit, washing, purging, drying, lids, lights, cylinders,
pistons, gas lines
cleaning, rinsing, water-jackets of the cylinders
cleaning, rinsing, water-jackets of refrigerators (gas)
cleaning, flushing or replacement of pipes finned aluminum
checking wear and replacement of parts, Assembly units
replacement of operating valves
checking and replacement of gland
checking and replacing the pads (sliders) crosshead
check and replace the crosshead fingers
checking, replacement of pistons, piston rings, rods
check, replacement of bearings of the upper connecting rod
check, replacement of the liners of the bottom crosshead
check, replace connecting rod bolts
check, replacement of the main bearings of the crankshaft
overhaul reciprocating air compressors 2ВМ4-27/9
overhaul every 20000-24000 hours worked:
compressor repair at Customer's location
repair of the compressor at the production facilities By
price: on the complexity of repair and number castelseprio spare parts for air, gas, reciprocating compressors, based on М4запчасти compressor reciprocating air 2ВМ4-27/9