Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  heating engineering, boilers

Solid fuel boilers long burning "Wichlacz" model gk-1, power 17 kW

Offer type: salePublished: 24.02.2016
Company:http://www.wichlacz.com.ua/
Seller:Potugina Yuliya
Phones:
Show phone
Write a message
Address:Ukraine, Zaporiz'ka Oblast', Zaporizhia

Model boilers GK-1 17 kW – has a number of advantages and characteristics having no analogues in Ukraine:

  • - the boiler used in the method of the upper layer of burning fuel (the fuel burns like a candle from the top to the bottom) allowing you to burn more economical fuel than the conventional method of burning flame in General.
  • - method of upper stratified combustion enables to operate the boiler, the fuel (trash) with high humidity and ash content.
  • - increased the maximum size of the combustion chamber, allows to work up to 3 days on one load of fuel (this characteristic may change in the range 12-76 hours, depending on the type of fuel and thermal properties of the building).
  • - wide slant furnace door, convenient for maintenance and downloading of bulk fuel, wood and of large size.
  • is boiler steel, the thickness of the metal used: 6mm.
  • the calculated boiler efficiency 85% (depending on type of fuel may vary in the range 82-89%).
  • - accurate temperature adjustment and heating power (increase and decrease) in the manual mode and automatic with room temperature controller, weather controller, allows youto save up to 50% of fuel, compared with the use of simple boilers with conventional combustion
  • - automatically supported set temperature: from 35 to 90 °C (20-50% of working hours, the fuel in the boiler is in a state of decay) as the result of a longer period of work on one boot and the lack of burnout of the fuel).
  • - applied the principle lapped by the grid bars of the grate are made in the form of thick-walled pipes, which circulates the water (the boiler is protected against burning).
  • - screw pozhimanie handles on the pot make it easy and the most tightly closed doors of the boiler.
  • - wide slant furnace door, convenient for maintenance and downloading of bulk fuel, wood and of large size.
  • - in the delivery of the boiler includes: boiler, automation, fan for air supply, rotary chimney elbow (allowing you to install a flue on either side of the boiler, only to boilers up to 65 kW).
  • - if necessary, the boiler is equipped with optional boiler for indirect heating of hot water for domestic and industrial use by controlled automation.
  • - the boiler does not require constant care, rather every 2-3 weeks to clean boiler ash, which is easily removed.
  • - special pipe system of the heat exchanger, makes it easy to clean the boiler, thereby improving the work efficiency.
  • - the boiler is easy to maintain and operate (does not require qualified personnel).
  •  

    ADVANCED AIR SUPPLY SYSTEM

    Lot streaming flow of air into the furnace, with the switching of layers of fuel combustion will now be able to burn low grade fuel. The precise direction of air movement in the chamber, provide special openings, nozzles.

    QUICK UNBOXING OF THE BOILER

    The boiler is equipped with a special handle to supply air to the top layer, allowing the boiler to melt for 5-10 minutes, even on coal.

    BOILER CLEANING

    The boiler is equipped with a special handle to supply air to the bottom layer that makes it easy to clean the boiler (duality unburned fuel at the bottom of the boiler). Also this pen allows you to use the boiler at a simple boiler with simple (lower) the combustion of fuel.

    THE FUEL FOR THE BOILER

    For our applicable boiler different solid fuels - peat, coal, coal waste, pellets, cursorily, firewood, wood materials, solid waste, trash, etc. Method upper stratified combustion allows the boiler to function on virtually any fuel (debris) with high humidity and ash content.