Hammer chipping SP-4119 pneumatic
Offer type: salePublished: 26.02.2016
| Price: | 2 000 UAH |
| Company: | Remservis |
| Seller: |  Aleksandr |
| Phones: |  0991677123 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk |
Hammer chipping SP-4119.The preferred tools used in machine building metallurgy and production of pipe casting and also used for cutting metal products, edging, cleaning and caulking of welds for cutting grooves and holes in the water supply and drain pipes of cast iron, when used in the construction is suitable for punching holes and openings in concrete structures and masonry structures , for finishing and cutting of natural stone slabs. Improved mechanism to protect from vibration, allowing the operator to more accurately direct the cutting part of the hammer and clearer to choose the angles of inclination to the plane on which the impact is coming. Purchase chipper hammer will significantly increase the productivity, facilitate the work associated with the construction and installation of buildings and structures of concrete and metal, will reduce the injury of the operators when working through the retention device from relegation at idle blows. Hammer chipping SP - 4119 is designed for chopping, cleaning castings, cutting shells in forgings, burtovi pipes, cleaning of joints and other works.
The single blow energy, j, not less than 12,5
Blow frequency, s-1, not less ― 36,3
Specific consumption of air, m3/min, no more than 1,05.
Compressed air pressure, MPa to 0.63.
Hammer length without tool, mm ― 440.
Weight without tool, kg to 5.9.
The device and principle of operation.
The pneumatic chipping hammer consists of following basic units:
striking unit, which includes the barrel, firing pin and the air distribution system;
the housing-handle, consisting of a handle with a trigger, the body and the muffler;
protection arm, which includes a glass with two sealing sleeves;
protection from the chisel, which includes a manipulator and a spring-loaded sleeve.
When you press the trigger, the compressed air through the channel is supplied to the air distribution device that delivers air to the front or rear camera chipping hammer.
Under the action of compressed air the striker reciprocating movement in the barrel chipping hammer and strikes on the shank of the working tool.
The single blow energy, j, not less than 12,5
Blow frequency, s-1, not less ― 36,3
Specific consumption of air, m3/min, no more than 1,05.
Compressed air pressure, MPa to 0.63.
Hammer length without tool, mm ― 440.
Weight without tool, kg to 5.9.
The device and principle of operation.
The pneumatic chipping hammer consists of following basic units:
striking unit, which includes the barrel, firing pin and the air distribution system;
the housing-handle, consisting of a handle with a trigger, the body and the muffler;
protection arm, which includes a glass with two sealing sleeves;
protection from the chisel, which includes a manipulator and a spring-loaded sleeve.
When you press the trigger, the compressed air through the channel is supplied to the air distribution device that delivers air to the front or rear camera chipping hammer.
Under the action of compressed air the striker reciprocating movement in the barrel chipping hammer and strikes on the shank of the working tool.
