Line for production of fuel pellets, the pellets 800-1000kg/h, BT-1, 5
Offer type: salePublished: 26.02.2016
| Price: | 720 000 UAH |
| Company: | Bioekoprom |
| Seller: |  Severin Maksim |
| Phones: |  +38(099)738-67-98 Show phone |
| Address: | Ukraine, Poltavs'ka Oblast', Poltava |
GK Bioeconomy offers a line granulation based on its own produced granulator OGM 1.5.
Granulator OGM 1.5 production of GC "Biotechprom" is designed to work in difficult conditions. This is possible thanks to a modern pressing node, the new dispenser, made of stainless steel the gears and shafts, the use of special zinc-containing paints. Such constructive decisions allow to use the pellet mill OGM-1,5 upon receipt of the granules of the granulated hard material, including sawdust, shavings, straw, husks of grain, peat, etc.
Technical characteristics of the OGM-1,5
(capacity 0.8 – 1.2 t/h. the diameter of pellets 6-12mm).
1 Granulator OGM 1.5 in full completeness (without the matrix and rollers). 75,4 kW
2 the Mixer. 1.1 kW
3 Dispenser. 2.2 kW
The feeding Screw 4 is inclined. 2.2 kW
5 the System of cyclones and pneumatic transport. 18kW
6 Rotary feeders with Moto-reducer. 3.3 kW
7 Paternoster. 1.5 kW
8 the accumulative Hopper with auger. 4,0 kW
9 Cooler with vibration. 1.1 kW
10 Remote control.
11 the Set of connections and pipes for complete configuration of all systems and fitting equipment.
Total: 120,00 kW
Equipment OGM-1,5
1. The storage hopper raw material is used for collection of the crushed raw material before pelletizing. Located directly above . Equipped with agitator to prevent arching of raw materials, viewing Windows, stairs and railings.
Installed power, kW 2.2
The rotational speed of the motor, rpm 1500
Hopper volume, m3 3,5/6,0
Weight, kg 750/850
2 . Noria column cooling designed for the transportation of produced pellets in the cooling column.
Productivity, kg/hour not less than 2000/4000
Belt width, mm 150/175
Installed power, kW 1,5/2,2
Weight, kg 425/525
3. Column refrigeration is designed for continuous cooling of the pellets coming out of the pellet mill. Produced granules by passing through a column cooling, cool down and gain strength. The column cooling equip vibrating screen in case of necessity of screening the dust from the pellets.
Productivity, kg/hour 1500/2500
The cooling time, min 30
Installed power, kW 1,5
Weight, kg 430
4. Cyclones receive raw materials and cooling systems are designed for centrifugal the purification and capture of large particles merely cut, dust, metal inclusions.
Throughput, m3/h 3000
Diameter, mm 900
Height, mm 2050
Weight, kg 247
5. The remote control is designed to control the process pelletizing. Provides variable speed control, reverse, emergency off, zero, ultimate protection, engine protection against currents short circuit from overload currents. The Cabinet is made in outdoor with unilateral service.
6. Granulator OGM 1.5 is intended for , and receive granules from waste products of agriculture and forestry.
Technical characteristics of the OGM-1,5
Diameter of granules, mm 6-8
Performance when pellets Ø 6-8 mm, kg/h, not less than 800-1200
The number of rollers (roller), 2 PCs.
The number of installed electric motors 3
Installed power, kW 75
Voltage power circuits, 380
The body of the pellet mill firm structure
Granulator OGM 1.5 production of GC "Biotechprom" is designed to work in difficult conditions. This is possible thanks to a modern pressing node, the new dispenser, made of stainless steel the gears and shafts, the use of special zinc-containing paints. Such constructive decisions allow to use the pellet mill OGM-1,5 upon receipt of the granules of the granulated hard material, including sawdust, shavings, straw, husks of grain, peat, etc.
Technical characteristics of the OGM-1,5
(capacity 0.8 – 1.2 t/h. the diameter of pellets 6-12mm).
1 Granulator OGM 1.5 in full completeness (without the matrix and rollers). 75,4 kW
2 the Mixer. 1.1 kW
3 Dispenser. 2.2 kW
The feeding Screw 4 is inclined. 2.2 kW
5 the System of cyclones and pneumatic transport. 18kW
6 Rotary feeders with Moto-reducer. 3.3 kW
7 Paternoster. 1.5 kW
8 the accumulative Hopper with auger. 4,0 kW
9 Cooler with vibration. 1.1 kW
10 Remote control.
11 the Set of connections and pipes for complete configuration of all systems and fitting equipment.
Total: 120,00 kW
Equipment OGM-1,5
1. The storage hopper raw material is used for collection of the crushed raw material before pelletizing. Located directly above . Equipped with agitator to prevent arching of raw materials, viewing Windows, stairs and railings.
Installed power, kW 2.2
The rotational speed of the motor, rpm 1500
Hopper volume, m3 3,5/6,0
Weight, kg 750/850
2 . Noria column cooling designed for the transportation of produced pellets in the cooling column.
Productivity, kg/hour not less than 2000/4000
Belt width, mm 150/175
Installed power, kW 1,5/2,2
Weight, kg 425/525
3. Column refrigeration is designed for continuous cooling of the pellets coming out of the pellet mill. Produced granules by passing through a column cooling, cool down and gain strength. The column cooling equip vibrating screen in case of necessity of screening the dust from the pellets.
Productivity, kg/hour 1500/2500
The cooling time, min 30
Installed power, kW 1,5
Weight, kg 430
4. Cyclones receive raw materials and cooling systems are designed for centrifugal the purification and capture of large particles merely cut, dust, metal inclusions.
Throughput, m3/h 3000
Diameter, mm 900
Height, mm 2050
Weight, kg 247
5. The remote control is designed to control the process pelletizing. Provides variable speed control, reverse, emergency off, zero, ultimate protection, engine protection against currents short circuit from overload currents. The Cabinet is made in outdoor with unilateral service.
6. Granulator OGM 1.5 is intended for , and receive granules from waste products of agriculture and forestry.
Technical characteristics of the OGM-1,5
Diameter of granules, mm 6-8
Performance when pellets Ø 6-8 mm, kg/h, not less than 800-1200
The number of rollers (roller), 2 PCs.
The number of installed electric motors 3
Installed power, kW 75
Voltage power circuits, 380
The body of the pellet mill firm structure
