Line drying and crushing of sawdust and wood chips up to 1000 kg/h
Offer type: salePublished: 26.02.2016
| Price: | 595 000 UAH |
| Company: | Bioekoprom |
| Seller: |  Severin Maksim |
| Phones: |  +38(099)738-67-98 Show phone |
| Address: | Ukraine, Poltavs'ka Oblast', Poltava |
Is intended for drying wet sawdust capacity up to 800 – 1000 kg/h.
The line is built on the basis of a drum drying AVM 065 with restored drum. Electrical equipment used new.
Technical characteristics of the complex:
№ Name number
1 Automatic system of burning sawdust 1 PC.
2, the storage Hopper with automatic feed in system burning sawdust, the volume of 1.4 m3 1 PC.
3 the Heat generator 1 PC.
4 Scraper conveyor load raw material into the drying drum, 1.5 kW 1 PC.
5 Vibrating screen for sawdust sieving, 0.55 kW 1 PC.
6 tumble Dryer with the system drive power 4 kW 1 PC.
7 the air with the trap heavy particles 1 PC.
8 Great cyclone power 18.5 kW 1 PC.
9 great cyclone Feeder power 1.5 kW 1 PC.
10 Molotkov , 22 kW 1 PC.
11 Flexible air duct 1 PC.
12 Small sedimentary cyclone -
13 Feeder metering small cyclone 1 PC.
14 electrical control Cabinet with frequency Converter on the drying drum. 1 PC.
Capacity: up to 1000 kg per hour of dried sawdust. Provided the moisture content of incoming raw material not more than 50% and moisture 12%, and also use for heating sawdust with humidity not more than 20%.
Sawdust at the entrance. Fraction at the inlet of drying is not more than 3 mm in thickness.
The installed capacity of electric drives of 55 kW.
The consumption of raw materials 5-7 cubic meters per 1 ton dried sawdust (depends on the type of raw material)
The fuel consumption of 1.3-1.4 cubic meters of sawdust with moisture content up to 20% per 1 ton of finished product
Facility requirements: area Required - 180 sqm, ceiling Height 6 m (this height is required in one place - the place of installation large sedimentary cyclone)
Number of attendants: 2 persons
The line is built on the basis of a drum drying AVM 065 with restored drum. Electrical equipment used new.
Technical characteristics of the complex:
№ Name number
1 Automatic system of burning sawdust 1 PC.
2, the storage Hopper with automatic feed in system burning sawdust, the volume of 1.4 m3 1 PC.
3 the Heat generator 1 PC.
4 Scraper conveyor load raw material into the drying drum, 1.5 kW 1 PC.
5 Vibrating screen for sawdust sieving, 0.55 kW 1 PC.
6 tumble Dryer with the system drive power 4 kW 1 PC.
7 the air with the trap heavy particles 1 PC.
8 Great cyclone power 18.5 kW 1 PC.
9 great cyclone Feeder power 1.5 kW 1 PC.
10 Molotkov , 22 kW 1 PC.
11 Flexible air duct 1 PC.
12 Small sedimentary cyclone -
13 Feeder metering small cyclone 1 PC.
14 electrical control Cabinet with frequency Converter on the drying drum. 1 PC.
Capacity: up to 1000 kg per hour of dried sawdust. Provided the moisture content of incoming raw material not more than 50% and moisture 12%, and also use for heating sawdust with humidity not more than 20%.
Sawdust at the entrance. Fraction at the inlet of drying is not more than 3 mm in thickness.
The installed capacity of electric drives of 55 kW.
The consumption of raw materials 5-7 cubic meters per 1 ton dried sawdust (depends on the type of raw material)
The fuel consumption of 1.3-1.4 cubic meters of sawdust with moisture content up to 20% per 1 ton of finished product
Facility requirements: area Required - 180 sqm, ceiling Height 6 m (this height is required in one place - the place of installation large sedimentary cyclone)
Number of attendants: 2 persons
