Collet chucks with a set of ER TYPE collets 0760

Collet chucks with a set of ER collets: R8; KM2-KM5; 7:24 30-50 DIN2080.
The kit includes: collet Chuck, set of collets and key.
Packed in wooden or plastic case.

ER16

Marking To d, mm Cone Weight, kg R8-ER16/8 8 2, 3, 4, 5, 6, 7, 8, 10 0.92 30 R8-ER16/8 7;24 30 0.76 40-ER16/8 7:24 40 1.30 50-ER16/8 7:24 50 MS2 2.48-ER16/8 MS2 MS3 0.89-ER16/8 MS4 MS3 1.02-ER16/8 MS4 1.28

  Customized package

ER16 (12): 1, 1.5, 2, 2.5, 3, 4, 5, 6, 7, 8, 9, 10 mm

 

ER25

Marking To d, mm Cone Weight, kg R8-ER25/10 10 3, 4, 5, 6, 8, 10, 12, 14, 15, 16 1.20 30 R8-ER25/10 7;24 30 1.08 40-ER25/10 7:24 40 1.35 50-ER25/10 7:2.78 24 50 MS2-ER25/1.00 MS2 10 MS3-ER25/10 MS3 MS4 1.10-ER25/10 MS4 1.40 R8-ER25/18 18 1, 1.5, 2, 2.5, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 1.53 30 R8-ER25/18 7;24 30 1.37 40-ER25/18 7:24 40 1.72 50-ER25/18 7:24 50 MS2 3.11-ER25/18 MS2 MS3 1.27-ER25/18 MS3 MS4 1.40-ER25/MS4 18 1.66

ER32

Marking To d, mm Cone Weight, kg R8-ER32/12 12 3, 4, 5, 6, 8, 10, 12, 14, 15, 16, 18, 20 1.81 30 R8-ER32/12 7:24 30 1.66 40-ER32/12 7:24 40 2.00 50-ER32/12 7:50 24 3.38 MS3-ER32/12 MS3 MS4 1.72-ER32/12 1.98 MS4 MS5-ER32/12 MS5 2.86 R8-ER32/21 21 2, 2.5, 3, 3.5, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 2.89 30 R8-ER32/21 7:24 30 2.74 40-ER32/21 7:24 40 2.94 50-ER32/21 7:24 50 4.43 MS3-ER32/21 MS3 MS4 2.81-ER32/21 3.12 MS4 MS5-ER32/MS5 21 4.00

ER40

Marking To d, mm Cone Weight, kg R8-ER40/15 15 3, 4, 5, 6, 8, 10, 12, 14, 15, 16, 18, 20, 22, 24, 26 2.93 30 R8-ER40/15 7:24 30 2.77 40-ER40/15 7:24 40 2.97 50-ER40/15 7:24 50 3.64 MS3-ER40/15 2.53 MS3 MS4-ER40/15 2.92 MS4 MS5-ER40/R8 3.63 15 MS5-ER40/24 24 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26 4.55 30 R8-ER40/24 7:24 30 4.25 40-ER40/24 7:24 40 4.60 50-ER40/24 7:24 50 5.99 MS3-ER40/24 4.34 MS3 MS4-ER40/24 4.66 MS4 MS5-ER40/24 MS5 5.49

 ER50

Marking To d, mm Cone Weight, kg 40-ER50/12 12 12, 14, 16, 18. 20, 22, 24, 26, 28, 30, 32, 34 7:24 40 8.93

 

The thread in the shank

Cone cartridge Thread in the shank R8 7/16"-20UNF 7:24 30 M12 X 1.75 7:24 M16 X 2.0 40 7:24 50 MS2 3.0 M24 X M10 X 1.5 M12 X 1.75 MS3 MS4 MS5 M16 X 2.0 M20 X 2.5

Instructions for installing collets and nuts ER series.

1. Insert the collet into the nut at an angle and turn, lightly pressing the nut to engage the eccentric groove at the ledge.

2. Finally press the collet into the nut and put in a collet Chuck. Insert the cutter into the hole and tighten with a key.

3. When changing the cutter or collet all actions must be repeated in reverse order.