Diagnosis centrifugal smoke exhausts (draft equipment)

This pump unit, which is needed to convert the mechanical energy into the energy flow. Centrifugal exhaust fans are designed to remove smoke gases from the furnaces of steam boilers. They also are used in processing plants for moving non-corrosive gases weak dusty solids.

The maximum flue gas temperature at the entrance should not be more than + 250 ° C. The centrifugal exhaust fans are made of the right and left directions of rotation. Left rotation of the wheels is considered counter-clockwise when looking at the ID fan standing on the part of the motor; respectively, the right to consider a clockwise rotation.

Let's talk about the diagnosis of centrifugal exhaust fans, try to figure out the best and versatile diagnostic method.

The most common and preferred method is vibration diagnostics. Vibradiagnostika - a method of non-destructive testing, intended to detect by measuring the acoustic and vibration characteristics of the equipment defects. We recommend using a vibrometer company "Balteh" for entry-level - BALTECH VP-3470 or advanced vibrodiagnotichesky complex CSI-2140 (IORS, CSI-Technologies). This includes incoming inspection and bearing condition. entrance control stands bearing condition allows to prevent faulty bearings on your enterprise.

The youngest is tribodiagnostics diagnostic method, the essence of the method is to identify deviations in the technical condition of the unit by analyzing the oil.

Our company supplies minilaboratorii on oil analysis. Laboratories are compact and replaced with 2 rooms with chemical equipment. Discover laboratories BALTECH OA-5000, BALTECH OA-5400, BALTECH OA-5800 BALTECH site.

Condition monitoring units perfectly by using thermal imaging company "Balteh" series BALTECH TR-0110 (ThermaRed) of different temperature range. Knowing the maximum allowable temperature of the heating units, we can easily control of the technical condition.

So to summarize, and note that none of the diagnostic methods does not give an absolute guarantee of the reliability of the result. Today, the combination of all these methods is the best and comprehensive solution.

The company "Balteh" developed the concept of "reliable technology", is an integrated approach to the organization of technical diagnostics service. The concept brings together all the structures and methods of diagnosis.

If any defects need repair or adjustment work such as shaft alignment or balancing of impellers fans in their own supports. We recommend using specially developed for this purpose tsentrovschikami "QUANTUM-LM" or a series of tsentrovschikov Fixturlaser. To work on balancing recommend Vibrometer-balancer BALTECH VP-3470.

Managers of our company will always be happy to come to your aid. As qualified technicians, "Balteh" staff were to solving technical problems.

By purchasing equipment from us, you get along with warranty service, also after-sales service and initial training of specialists working with the purchased unit.

The company "Balteh" has its own training center in Saint-Petersburg (CA License №1872 "Balteh" for training and retraining).

Along with the training center "Balteh" provides services of technical service (certificate of attestation number 58A050798 Laboratory of nondestructive testing).

For more information, we suggest to familiarize with the site of the company "Balteh".