Conveyors chain
Offer type: salePublished: 07.02.2017
| Price: | negotiated |
| Company: | SOKOL Zavod elevatornogo oborudovaniya TOV |
| Seller: |  Ol'ga |
| Phones: |  +380675709865. +380504358737 Show phone +380730019816 Show phone |
| Address: | Ukraine, Kharkivs'ka Oblast', Kharkiv |
Chain conveyor with submerged scrapers designed for horizontal or inclined (angle of inclination not more than 15), reversible, two-way movement of grain and products of its processing to all climatic zones or in the lower part of the metal grain dump pits.. Designed for installation outdoors without shelter. The length of the conveyor is formed by a set of drive and idler Stan-tions, bushing, boot partitions, and partitions intermediate of discharge. Connection of all components of the conveyor bol-Tomoe. A number of lengths of bushing sections from a 0.625 m to 2.5 m – enables you to assemble a conveyor of any length in increments of 125mm. In the boot section of the product flow is directly working on the lower branch of the chain with scrapers. The walls of the boot section lined with polyurethane with a thickness of 3.5 mm. Passing from the top section are covered with removable covers made of galvanized metal. The chain tension is achieved by two tension screws. Checkpoints section the special design allow to install the rack latches with handles-s ' or electric actuator and to provide an intermediate discharge. Flap the valves are opened along the axis of the conveyor. Traction body of the conveyor is a special version of the standard M112 or chain TRD-38. On the chain are plastic scrapers.
The pipeline is produced in two coating options:
— powder painted grey
— hot-dip galvanizing not less 275g/m2
The actuator consists of a cylindrical reducer is domestic or imported and electro-motor or motor-reducer imported. Reducer with hollow output shaft dressed on the drive Noi the shaft of the conveyor and transmits rotation to it directly without coupling.
The pipeline is produced in two coating options:
— powder painted grey
— hot-dip galvanizing not less 275g/m2
The actuator consists of a cylindrical reducer is domestic or imported and electro-motor or motor-reducer imported. Reducer with hollow output shaft dressed on the drive Noi the shaft of the conveyor and transmits rotation to it directly without coupling.
