Bucket conveyor (Z noriya)

The bucket conveyor is a block design and consists of a set of different number of sections: walk-through of vertical and horizontal, angular, loading, unloading, driving, tension.

Stretch section located at the bottom at the beginning of the conveyor and is designated for separate tensioning of the chain with the buckets. In the boot section of the bucket tightly with the optic chiasm adjacent to each other, which eliminates spillage of product during loading. There are several zagruzochnykh sections. Communicating vertical and horizontal sections are supplied in various lengths, this gives you the ability to pick exactly the required length of the conveyor. The connection between the sections flanged on the bolts. Angular sections of two types :L and Z shaped-allows to collect the required pipeline configuration.

Due to the special design of the conveyor, the buckets are in a horizontal position throughout the length of transportation and only in unloading section under the action of electric ,pneumatic or manual drive, the buckets are turned completely.

The last section - drive –located at the end of a conveyor line. The chain is driven by a motor reducer.Control circuit for the drive must provide smooth start/ stop and, if necessary, and smooth change of the rotational speed of the motor.

Buckets are made of food grade, cold-resistant high impact polymer.

Chain high quality a roller with a hollow roller ensures long life. The construction of the conveyor enables the easy replacement of buckets without disassembly section and disconnect the circuit.

The bucket conveyor has the advantage over other types of conveyors when combined in one design of the vertical and horizontal movements of the load. And adding to that respect to the product bucket conveyor is the best solution for transportation of seeds and fragile goods.