Dental 3D Dental printer the Objet30 Prime by Stratasys
| Company: | TOV 'ABV-STROJ' |
| Seller: |  Strelchenko Mykhailo Sergijovych |
| Phones: |  0675050069 Show phone |
| Address: | Ukraine, Kyiv |
Dental 3D Dental printer the Objet30 Prime by Stratasys
Performs the following tasks:
- surgical templates
- plaster model of collapsible/non-collapsible
models for the manufacture of aligners/transparent cap
- wax-up
- temporary crowns and bridges
- burned model
Technical characteristics of the Objet30 Prime Dental
Materials for the simulation:
Clear bio-compatible material (MED610)
VeroDentPlus (MED690)
VeroGlaze (MED620)
Support material:
SUP705 (WaterJet Soluble)
The maximum size of the created model (XYZ):
300 x 200 x 100 mm
Resolution:
X-axis: 600 dpi: Y-Axis: 600 dpi; Z-axis: 1600 dpi
Accuracy:
0.1 mm, may vary depending on part geometry, size, orientation, material and post-processing method
Minimum layer thickness:
16 microns
Modes of creation:
High quality: resolution of 16 microns
High speed: resolution 28 micron
Compatible with workstation:
Windows 7 and Windows 8
Network connection:
Ethernet TCP/IP 10/100 base T
The size and weight of the system:
82,5 x 62 x 59 cm, 106 kg
Operating conditions:
The temperature of 18-25 °C; relative humidity 30-70%
Power requirements:
Single-phase power supply: 100-200 V; 50-60 Hz; 7a or 200-240V; 50-60 Hz; 3.5 A
Regulatory compliance:
CE/FCC/RoHS
