3d printer the Objet30 Pro

3d printer the Objet30 Pro

Three-dimensional modeling in your workplace

With the help of a 3d printer the Objet30 Pro You can easily create models with complex geometry, with moving parts and a smooth surface. Material for a 3d simulation You can choose from 8 available, among which is heat resistant, transparent and simulated polypropylene.
Quiet operation of the printer, as well as a fairly roomy tray size 300*200*150 mm will allow You to create models for various purposes: equipment for medicine, household sector, etc. Rapid prototyping of complex parts with a high level of detail will be available along with the Objet30 Pro right in your office!

Materials for the simulation:
Transparent rigid (VeroClear)
Rigid opaque white (VeroWhitePlus)
Rigid opaque blue (VeroBlue)
Rigid opaque black (VeroBlack)
Rigid opaque gray (VeroGray)
Polypropylene-Like (DurusWhite)
Heat-resistant (RGD525)

Support material:
Non-toxic gel-like photopolymer-based FullCure 705

Material cartridges:
Four sealed cartridge weighing 1 kg

The pure size of the created model:
294 x 192 x 148,6 mm

Layer thickness:
28 microns; 16 microns for VeroClear material

The resolution of the axes:
X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 900 dpi

Accuracy:
0.1 mm, may vary depending on part geometry, size, orientation, material and post-processing method

Size and weight:
Camera: of 82.5 × 62 × 59 cm; 93 kg

Tray size: 300 × 200 × 150 mm
Compatible with workstation:

Windows XP, Windows 7 32/64-bit

Network connection:
Ethernet TCP/IP 10/100 base T

Jetting heads::
2 the print nozzles; SHR (Single Head Replacement)

Power requirements:
Single-phase power supply:
100-120V~; 50-60 Hz; 7 A
200-240V~; 50-60Hz; 3.5 A

Compliance with regulations:
CE/FCC/RoHS

Operating conditions:
Temperature 18-25 °C (64-77 °F); relative humidity 30-70% RH non-condensing