Electric arc spraying gun OSU Hessler 300 A Anticor B/a

The installation of 300-and anticor for arc spraying metal (zinc, aluminum, zinc-aluminum, brass, etc.) On metal surface to protect against corrosion.

setting complete with gun, fitted with "stop-start" supply hoses with Teflon tubes and a cable length of 10 m, a special console-feeder for wire feeder - is a mobile unit for the production of works in the premises and outdoors.

The apparatus is mounted in a metal enclosure on the trolley and is equipped with a special holder reels with wire (upper part of the body). The spraying gun has the necessary devices for controlling the current, voltage and control wire feed, and adjust pressure of spray air, and filter separator. The principle of operation of the apparatus is extremely simple. Two wires which are electrodes, are served from the coils to the receiver-the distributor, which delivers the wire next to the gun through separate channels coated with Teflon.
The gun wire both pushed to the nozzle part by means of two pressure rollers. Clamping feed rollers are driven by a motor reducer located in the pistol grip. In the nozzle part, two wires will connect to form an arc, molten zinc or aluminum. Supplied to the nozzle part of the compressed air evenly spray the molten metal on the surface. The thickness of the layer (20 - 30 µm) depends on diameter of an applied wire and is governed by the speed of the gun. The principle of metallization by this method practically does not differ from the principle of painting.

The instruction in Russian is provided.
Recommended wire - zinc ø 2.0 (or 2.5 mm), aluminum ø 2.0 mm.