Biosecurity on wood "Primus" 5 l
Offer type: salePublished: 03.02.2018
| Price: | 62 UAH |
| Company: | OOO 'Edem' |
| Seller: |  Moskalenko Yurij Anatal'evich |
| Phones: |  066-98-111-84 Show phone |
| Address: | Ukraine |
A solution of biosecurity "PRIMUS" to protect the wood that is used in complex atmospheric conditions and used under a roof and in open parts of houses, but without contact with the ground, (rafters, roof supports, fences, supporting structures of wooden houses, wooden structures under the open sky, etc.). Biosecurity penetrates deep into wood protecting it from all insect pests and beetles Longhorn beetles, bark beetle shashel mold and rot on wooden structures.
Properties and General specifications:
A solution of biosecurity "PRIMUS" refers to water-based solutions which are not washed out by water from the wood surface, after application, except for the green dye which does not have bonding properties with wood, can wash with water and fade under the influence of sunlight, the green is exclusively the reference color when applied. Impregnation is a ready to use solution from dark green to light green. When applying the impregnating high concentration of wood for a while gets a brown - greenish tint, which after drying becomes a light green color.
Wood treated by impregnation - good glues, adhesives, foams and sealants.
On average, the consumption of impregnation is ± 250 mg / m2.
To obtain the flow rate that will provide the necessary protection level of the tree, in most cases, it is necessary to make 2 meals a day treatment. For example, to protect the elements of buildings that lend themselves to intense damaging factors (precipitation, temperature, solar radiation effects, etc.).
• Ingredients: water, biocide (Oxon), special additives (antifoam), dyes.
• Colors: from dark green to light green.
• Ambient temperature during application: from + 5 degrees to + 30 degrees C.
• Relative humidity: no more than 75%.
• Drying time: (at temperature + 20 degrees C and relative humidity 60-70%).
between layers - 12 hours, full - 24-48 hours.
• Tools: brush, roller, sprayer.
• Cleaning tools: rinse thoroughly under running water.
• Precautions: when working with treatment is necessary.
use rubber gloves and goggles. To work in a well.
- ventilated areas. In case of contact with skin, face or in.
eyes should be washed with plenty of running water.
To prevent impregnation in the respiratory system and digestion!
In case of contact, immediately consult a doctor. impregnations.
should be stored in places not accessible to children!
• Shelf life: biosecurity impregnation of wood stored for 12 months V.
original packaging tightly closed and at temperature.
+ 5 degrees - + 25 degrees C, without direct sunlight.
water ±95%.
biocide ±3,5%.
Special additives of ±0.5%.
dyes are ±1%.
Surface preparation:
Wood, which is impregnated, should be cleaned from bark if any, after pre-dried up to 35-50% humidity, that is, to the state of its operation.
Method of application:
Impregnation should be applied with a positive temperature, the base should be clean and dry, free from coatings. The impregnation can be applied to the surface by brush, roller, garden sprayer, spray gun or by dipping in a bath. To avoid applying in windy weather and under direct sunlight, so high-speed drying reduces the depth of impregnation of wood.
