Application:
Biosecurity "Primus" (concentrate) strong antiseptic to protect the wood from biological deterioration, fungus mold and mildew on wood, protecting the wood from the appearance of shashel, bark beetles and other insects and wood beetles in the wood.
Impregnation of biosecurity "Primus" (concentrate) to protect the wood that is used in complex atmospheric conditions and used under a roof and in open parts of houses, but without contact with the ground, (rafters, roof supports, fences, supporting structures of wooden houses, wooden structures under the open sky, etc.).
Properties and General specifications:
Impregnation of biosecurity "Primus" (concentrate) refers to the impregnation of water-based which not washed out by water from the wood surface, after application, except for the green dye which does not have bonding properties with wood, can wash with water and fade under the influence of sunlight, the green is exclusively the reference color when applied. Impregnation of biosecurity ""Primus" (concentrate) is diluted with water in% 1: 9 receiving the color from dark green to light green. When applying the impregnating high concentration of wood for a while gets a brown - greenish tint, which after drying becomes a light green color. Wood treated by impregnation - good glues, adhesives, foams and sealants.
The consumption of impregnation is ± 250 MLG per m2 of the surface of the wood, the consumption of impregnation to protect the wood depends on the type of wood, quality of wood and the moisture content of wood, which is treated by impregnation. The minimum flow rate for impregnation of wood by a single treatment on m2:
• for planed wood surface ± 200 MLG per m2.
• for non-planed wood surface ± 300 MLG / m2.
To obtain the flow rate that will provide the necessary protection level of the tree, in most cases, it is necessary to make 2 meals a day treatment. For example, to protect the elements of buildings that lend themselves to intense damaging factors (precipitation, temperature, solar radiation effects, etc.).
• Ingredients: water, biocides, additives, dyes.
• Colors: from dark green to light green.
• Ambient temperature during application: from + 5 degrees to + 30 degrees C.
• Relative humidity: no more than 75%.
• Drying time: (at temperature + 20 ° C, and relative humidity.
60-70%).
between layers - 12 hours, full - 24-48 hours.
• Tools: brush, roller, sprayer.
• Cleaning tools: rinse thoroughly under running water.
• Precautions: when working with treatment is necessary.
use rubber gloves and goggles. To work in a well.
- ventilated areas. In case of contact with skin, face or in.
eyes should be washed with plenty of running water.
To prevent impregnation in the respiratory system and digestion!
In case of contact, immediately consult a doctor. impregnations.
should be stored in places not accessible to children!
• Shelf life: impregnation of biosecurity "PRIMUS" (concentrate).
the tree is stored 12 months in original packaging tightly.
closed at a temperature of + 5 degrees - + 25 degrees C, without direct sun.
rays'.