Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  mechanical equipment

Spare parts 1k62

Offer type: salePublished: 13.02.2019
Seller:RK Instrument
Phones:
Show phone
Write a message
Address:Ukraine, Dnipropetrovska Oblast'

The screw nut tailstock 1K62-03-No. 37/16 (length: 399 mm)
Screw and nut carriage 1K62.05.50.21/22 (F22) (length L: 730mm)
Screw with nut caliper 1K62-04-22/16 (length: 294 mm)
Screw running 1K62-11-21 (RMC 710mm) (RMC=710 mm)
Uterine nut 1K62-06-63 (bronze)
Disk external friction 1K62-02-206
Disk friction internal 1K62-02-205
The wedge carriage 1K62-05-47
Wedge caliper 1K62-04-23
The tape brake 1K62-02-213
The tape brake 3rd axis 1K62-02-253
Clutch friction in the collection of 1K62-02-310
The pump plunger 1K62-02-76
The tailstock 1K62-03-36 (diameter of quill: 75 mm)
Gasket gearbox 1K62-02-288
The toolholder Assembly 1K62-04-38
Rake 1K62-11-32 L=291мм (RMC 1000mm) (L=291 mm, RMC=1000 mm)
Rake 1K62-11-33 L=705мм (RMC 710, 1000, 1400 mm)
14 thrust axis 1K62 02-144 (weight: 0.9 kg)
Apron Assembly 1K62-06-01
Pulley main drive 1K62-02-362 (cast iron) (for d=255 mm)
The spindle 1K62-02-130 (bar capacity: 45 mm)
Clutch 1K62-06-105
Tailstock
The quill Assembly 1K62-03-300СБ (diameter of quill: 75 mm)
Strap clamping 1K62-03-13 (casting SCH15 GOST 1412-79)
The tailstock Assembly (diameter of the quill: 80 mm)
The tailstock Assembly (diameter of the quill: 80 mm)
Shaft running 1K62-11-25 (RMC 1000mm, L=1708мм) (RMC=1000 mm)
Shaft running 1K62-11-26 (RMC 1400mm, L=2108мм) (RMC=1400 mm)
Screw running 1K62-11-22 (1000mm RMC) (RMC=1000 mm)
Pulley 1K62-11-57 (d=57 L=84 mono) (diameter D: 95 mm)
Shaft running 1K62-11-24 (RMC 710mm, L=1418мм) (RMC=710 mm)
Cushion 1K62-11-30
Screw running 1K62-11-23 (1400mm RMC) (RMC=1400 mm)
Pulley 1K62-11-56 (d=157 L=37 mono) (the diameter D: 157 mm
Carriage
Screw carriage 1K62-05-50 (L=730, d=26mm) with no nuts (length L: 730 )
Screw nut carriage 1K62-05-21 (for screw carriage 1K62.05.50)
The ring recut 1K62-05-83 (steel 15 GOST 1050-74)
Gear 1K62-05-49 (m: 2,25; Z: 20)
Headstock spindle (gearbox)
The shaft 2nd axis Assembly 1K62-02-230R (m: 2,25; Z=34, Z=39)
The shaft of the 3rd axis Assembly 1K62-02-330R (m: 2,25; Z=47, Z=55, Z=38)
Sector 20-th axis 1K62-02-356
The gear unit 1K62-020-107 (m: 2,25; Z: 47; 55; 38)
Roller clutch 1K62-02-131 (fit for 10 slots)
Roller spline 1K62-02-132
Caliper
The toolholder Assembly 1K62-04-21 (height H: 340 mm)
The handle of the tool post 1K62-04-13 (kit: bushing, bolt, couplings
Bolt tool post 1K62-04-26
The upper part of the caliper (center-to-center distance: 90 mm)
Clutch Cam 1K62-04-24
Clutch Cam 1K62-04-25
Protector 1K62-04-37
Caliper upper part 1K62-04-111 (casting SCH20 GOST 1412-79)
Caliper middle part 1K62-04-12 (casting SCH20 GOST 1412-79)
The flange of the tool holder 1K62-04-14
Apron
The shaft 18 axis 1K62-06-120
Val 5th axis 1K62-06-118 (ms: 4; Z visits: 4)
Shaft to the 6th axis 1K62-06-108
Gear shaft 8 axis 1K62-06-314 (m: 2,25; Z: 21)
Shaft-pinion 9-th axis 1K62-06-310 (m: 3; Z: 10)
Copier (drum) 13 axis 1K62-06-82 (mates with item 06-110)
Cover apron 1K62-06-250
Clutch 1K62-06-106 (Z: 72; m: 1,75)
The pump piston apron 1K62-06-25
Sector 18-th axis 1K62-06-86 (mates with item 06-120)
Worm gear 1K62-06-35 (m axis: 4; Z: 20)
Gear-clutch 10-th axis 1K62-06-99 (Z=37) (m: 2; Z: 37)
Gear-clutch 2nd axis 1K62-06-97 (m=2 Z=27) (m: 2; Z: 27)
Shaft 11-th axis 1K62-06-112
The shaft 12 of axis 1K62-06-179
The shaft 13 axis 1K62-06-110
The shaft 14 axis 1K62-06-115
The shaft 16 axis 1K62-06-116
The shaft 17 the axis 1K62-06-117
The shaft of the 7th axis 1K62-06-113 (with sleeve 06-43)
Cushion 10-th axis 1K62-06-103
Cushion 1K62-06-232
Uterine nut (upper half) 1K62-06-23
Uterine nut (lower half) 1K62-06-24
Wedge apron 1K62-06-129 (height h: 17 mm; length L: 215 mm)
The ring recut 1K62-06-315
Shell handle 1K62-06-81
Shell handle 1K62-06-83
Flywheel 8th axis 1K62-06-254 (F: 200 mm)
Clutch 1K62-06-104 (Z: 26; steel 40KHN)
Axis 4th axis 1K62-06-111
Arm 1K62-06-207
Gear 10-th axis 1K62-06-94 (m=2 Z=40) (m: 2; Z: 40)
Gear 11th axis 1K62-06-89
Gear 1K62-06-311 (m: 1; Z: 87)
Gear 4th axis 1K62-06-95
Gear 6th axis 1K62-06-92 (m=2 Z=40) (m: 2; Z: 40)
Gear 6th axis 1K62-06-93 (m=2 Z=40) (m: 2; Z: 40)
Gear 7th axis 1K62-06-90 (m=2 Z=45) (m: 2; Z: 45)
Pinion 9-th axis 1K62-06-312 (m=1 Z=41) (m: 1; Z: 41)
Pinion 9-th axis 1K62-06-91 (m=2.25 Z=66) (m: 2,25; Z: 66)
Gear-clutch 5th axis 1K62-06-96 (m=2 Z=45) (m: 2; Z: 45)
Gear-clutch 8,10-y axis 1K62-06-98 (Z=26, m=2 Z=40) (m: 2; Z
Gearbox
Drum 1K62-07-17
Shaft-clutch 1-y axis 1K62-07-108 (m: 1,5; Z: 28)
Copier 1K62-07-75 (material: steel 45)
Arm 1K62-07-204 (material: phenolic U1-301-07 or steel 35
The shaft of the 1st axis 1K62-07-110
The shaft of the 1st axis 1K62-07-111
Shaft of the 2nd axis 1K62-07-113
The shaft of the 3rd axis 1K62-07-112
The shaft of the 3rd axis 1K62-07-114
Gear shaft 1st axis 1K62-07-107 (m=1.75 Z=35) (m: 1,75; Z: 35)
Gear shaft 1K62-07-106
Gear shaft 1K62-07-178
Gear shaft 2nd axis 1K62-07-109 (m: 2; Z: 15)
Roller 5th axis 1K62-07-115
Plug 1К2-07-157
Plug 1K62-07-30
Plug 1K62-07-32
Plug feed gearbox 1K62-07-29
Screw 1K62-16-37
Eye 1K62-07-215
The protective cover 1K62-50-01
Asterisk 1K62-07-76 (m: 2,25; Z: 21)
Copier 1K62-07-71 (material: steel 45)
Copier 1K62-07-73 (material: steel 45)
Copier 1K62-07-74 (material: steel 45)
Koperna line 1K62-07-72
Bracket 1K62-07-19
Clutch 1K62-07-91
Pump feed gearbox 1K62-07-26
Axis 2nd axis 1K62-07-120
Axis 3rd axis 1K62-07-123
The lever 1K62-07-33
The lever 1K62-07-34
Pull 1K62-07-117
Pull the 4th axis 1K62-07-116
Gear 1K62-07-101
Gear 1K62-07-102
Gear 1K62-07-103
Gear 1K62-07-105
Gear 1K62-07-77