Multi-purpose milling machine 6Т80Ш (200/220х800/560)
| Company: | OOO 'STANKIN' (Kievskij stankostroitel'nyij zavod) |
| Seller: |  Vyacheslav Vital'evich |
| Phones: |  050 3866612 Show phone |
| Address: | Ukraine, Kyiv |
Multi-purpose console machine with vertical rotary spindle model 6Т80Ш, intended for performance of various milling works in conditions of individual and serial production.
On the machines it is convenient to mill plane, edges, bevels, grooves on the small details of various configuration from steel, cast iron, nonferrous metals and plastics.
Technical characteristics of machine tools allow to make full use of tools made of high speed steel and are equipped with plates made of hard alloy.
Swivel spindle head with retractable tailstock on the machine 6Т80Ш allows you to perform milling of inclined surfaces.
The use of dividing heads, rotary table and vise extends technological capabilities of machine tools.
Specifications
The name of the parameter
6Т80Ш
The main parameters of the machine
Dimensions of table working surface (length x width), mm
200 x 800
The smallest and largest distance from vertical spindle face to table, mm
15..400
Distance from horizontal spindle axis to table, mm
0..400
Distance from axis of horizontal spindle to trunk, mm
123
Distance from spindle axis of the milling head to the bed rails (overhang), mm
130 625..
The greatest diameter of the cutter installed on the machine, mm
100
Desk
The largest longitudinal travel of table, mm
560
The greatest transverse travel of table, mm
220
Maximum dimensions of the workpiece mounted on the table (length x width x height), mm
800 x 260 x 450
Maximum table load (center), kg
200
Number T-slot Size T-slot
3
Move the table one division of the limb longitudinal/ transverse/ vertical, mm
0,05/ 0,05/ 0,02
Rapid travel of table longitudinal/ cross/ vertical mm/min
3,35/ 3,35/ 1,7
The number of stages of the working table feed
18
Limits of working feeds. Longitudinal and cross mm/min
20...1000
Limits of working feeds. Vertical, mm/min
10...500
Spindle
The spindle speed of a milling head rpm
56 2500..
Number of speeds vertical spindle
12
The frequency of rotation of the horizontal spindle, rpm
50 of 2240...
Number of horizontal spindle speeds
12
The movement of the movable sleeve (liner) vertical spindle, mm
70
Moving the tailstock spindle in one division of the limb, mm
0,05
Rotate the spindle head to the frame/ bed, grad
30/ 45
Rotation of the spindle head in longitudinal plane, deg
±45
Propulsion and electrical equipment
The motor of the main drive M1, kW
3,0
The motor spindle swivel head M2, kW
1,1
The electric motor drive of the feed M3, kW
0,75
The electric pump coolant M4, kW
0,12
The dimensions and weight of the machine
Machine dimensions (length x width x height), mm
1875 x 1600 x 2080
Weight of machine, kg
1430
