HDPE 277, 276, 273. Polyethylene pipe, PE cable

To choose and buy vacuum pressure You can get from our production. Sell secondary granule low density polyethylene blow molding (extruded polyethylene).
- GRANULE HDPE black (Deputy PE-100, extrusion).
Waste produced from pure HDPE extrusion. Is cleaned from foreign material, washing, agglomeration, granulation. Filter-mesh P-72.
The flow of the material is (MFR) of 0.5 g/10min. Granule black.Used in the manufacture of pipes, films, packages.
- GRANULE HDPE white (Vice-276,blow moulding, extrusion). Obtained from technological waste, marriage-blown tanks. Is cleaned from foreign material, washing, agglomeration, granulation. Filtration-two grids P-72. Is the fluidity (MFR) 0.35 g/10min. Granule bright white. Manufacture pipes, bags, blow moulded packaging
- GRANULE HDPE colored (Vice-276,blow moulding, extrusion). Obtained from technological waste, marriage-blown tanks. Is cleaned from foreign material, washing, agglomeration, granulation. Filtration-two grids P-72. Is the fluidity (MFR) of 1.2 g/10min. The beads are separated by color. Manufacture pipes, bags, blow moulded packaging
- GRANULE HDPE colored (Deputy LG ME 2500, extrusion). Obtained from technological waste, net primary protectors/packages ND. Is cleaned from foreign material, washing, agglomeration, granulation. Filtration-two grids P-72. Is the fluidity (MFR) of 0.24 g/10 min. The beads are separated by color. Film, packages customized for supermarkets (rustling)
- GRANULA black (Vice-276,blow moulding, extrusion). Prepared from technological waste production, marriage blow molding containers, and pipe production sectors. Is cleaned from foreign material, washing, agglomeration, granulation. Filtration-two grids P-72. Is the fluidity (MFR) 0.35 g/10min. The production of pipes, blown containers
We offer secondary granule for the production of polyethylene pipes (Deputy PE-100, PE-80, PE-63). Color: black, grey conditionally. Volume up to 100T/month.
In the presence of several formulations with different percentages of polyethylene of low and high pressure:
pipe composition LDPE: 80% HDPE+20% (for the production of thick-walled pipes)
- will regranulat pipe PE-100 (pure HDPE) (for the production of thick-walled pipes)
pipe polyethylene LDPE 60% HDPE+40% (for the production of thin-walled tubes)
Maybe to make composition under Your material. For example: 30% -70%, etc.
Raw material: waste pipe and blow molding production.
Packaging: bags of 30 kg.
Working on our material You will have cracks, cavities and air bubbles.
When you release the pipe it has a smooth surface.
Delivery of 20 tons of free on the territory of Ukraine.
Samples up to 5 kg., otpravlyaem free.
Tel.: (097) 414-39-54, (067) 591-49-39. Anastasia.

Additional information on the website polymers.com.ua