Longitudinally edger SPO Astra R4 BU

Sawing machine SPO-ASTRA-P4 of diving saw b/y
In working condition, used little, connected.

Sawing machine SPO-ASTRA-P4 is intended for trimming and accurate longitudinal sawing of boards. Due to the structural features, performance sawing machine SPO-ASTRA-P4 comparative performance multi rip machines. Due to the high precision sawing machine SPO-ASTRA-P4 is used in the composition of the lines production of glued timber, Board and furniture components.

Auto cycle sawing is the main feature of the sawing machine SPO-ASTRA-P4.
At the end of the cut the saw is lowered and returned below the level the surface of the table. Because of this, during the return stroke of the saw, the operator safely and quickly manages to remove the cut workpiece and resetting following a Board on the table. For high precision cutting, Board still fixed on the table sawing machine. Accurate the size of the boards sawn off is set by using several remotely managed stops. Submission and return of the saw unit when working sawing machine SPO-ASTRA-P4 is performed automatically.

Thus a high performance of cutting, when which, working in production lines, sawing machine SPO-ASTRA-P4 manages to cater for sawing a plot consisting of two employees at the same time of band saw machines.

Specifications sawing machine SPO-ASTRA-P4:


Cuttable width boards, mm 10 ... 220
The thickness of the sawn off boards, mm (not more than) 70 / (100)
Board length, mm (not more than) 4500 / 6200
Sawing precision, mm (no worse than) 0,2 / 1000
Diameter of saws, mm 300 450...
The diameter of the spindle mm 30
Speed saws, Rev/min 4000
Cutting speed, m/min (no more than) 40
Performance of the aspiration system, m3/h 2000
Compressed air consumption, l/min (not more than) 3
Installed power, kW 8,0
Dimensions of the machine length of cutting 6200, 7800 mm x 900 x 1200
Weight of machine, kg (not more than) 900