Paint spray hose DN6, DN10, DN13 - VD from 225 to 360 bar - Antistatic
Offer type: salePublished: 29.02.2020
| Company: | TOV Metasnab |
| Seller: |  Shulyatitskij Aleksandr |
| Phones: |  +380502752465 Show phone |
| Address: | Ukraine, Kyiv |
Anti-static Paint Hoses with metric (М16х1,5) and inch thread 1/4", 3/8" and 1/2", with a length of 7.5, 10, 15 and 20 meters.
The hose-leash length 1.9 and 2.5 meters.
Paint spray hoses with a nominal bore (internal diameter) DN6 (it's 1/4" or 6 mm), DN10 (it's 3/8" or 10 mm), DN13 (1/2" or 13 mm).
Paint hose high pressure from 225 to 360 bar.
Hose for any budget - production of Germany, Italy, USA, Switzerland or China.
Painting high-pressure hose assemblies for Wagner, Finish, Wagner, Graco, Titan, Dino-Power, etc.
Anti-static Painting high pressure Hose assemblies for Wagner, Finish, Wagner, Graco, Titan, Dino-Power, etc.
Paint hose high pressure (HD) is designed for picking paint spraying units airless spray Wagner, Finish, Wagner, Graco, Titan, Dino-Power, etc..
Designed to supply high pressure to the gun to spray coatings, water-and oil-based and solvent-based.
Paint anti-static hose reinforced with metal thread, with the two sides opressive fittings with metric internal thread M16×1.5 or inch (pipe) rezboy NPSM 1/4", 3/8" and 1/2".
The hoses are different lengths (10, 15 and 20 metres) are interconnected by double fittings with ACC. thread (in stock). You can switch from one thread to another (e.g., metric thread M16×1.5 pipe inch NPSM or NPS) using transition fittings.
