Screw-cutting lathe Model CW61100E

Screw-cutting lathe Model CW61100E Production CHINA SPECIFICATIONS Processing over bed, mm - 1000; Processing over Gap bed, mm - 1250; Processing on the caliper, mm - 650; The maximum length of a handle, mm - 2000; 3000; 4000; The mass of the workpiece at the processing centers, kg 8000; The width of the rails, mm - 755; Spindle taper No., ISO - A2-15; The diameter of the hole at the end of the spindle, mm - 200; The diameter of the hole in the spindle, mm - 130, 100; The type of end of the spindle M; Number of spindle speeds - 21 (manual); Range of spindle speed, rpm-1 - 3.15-315 2.5-250 (2-220); Main motor power, kW - US; The engine fast moving, kW - 1,5; The cross section of the cutter, mm 45x45; The rotation of the tool holder is rotated 90 degrees; Moving the tool holder in the transverse direction, mm - 200; Moving the tool holder in the longitudinal direction, mm - 200; The transverse movement of the caliper, mm - 520; Rapid travel of tool post (mm / min - 935; Quick lateral movement, mm / min - 1870; Quick longitudinal movement, mm / min - 3740; The number range of metric threads (mm - 45, 1-120; The number and range of inch threads, T. P. I. - 42, 30-1/4; The number and range of modular threads, mm - 46, 0.5-60; The number and range Pitkevich threads, D. P. - 48, 60-0.5; The number and range of longitudinal feeds (mm/Rev - 97, 0.064-12; The number and range of cross feed, mm/Rev - 97, 0.032-6; The number and range of feeds holders, mm/R - 97, 0.016-3; The diameter of tailstock quill mm - 160; The hole in the tailstock quill - M80, Morse No. 6; Travel of tailstock quill mm - 300; Weight, kg - 9600; 10800; 12000; Dimensions, mm - HH; HH; HH.