Bizator  /  Adverts  /  equipment and materials  /  agricultural equipment, spares

The corn harvester self-propelled six-row on the basis of MTZ-1523

Offer type: salePublished: 28.02.2015
Price:80 973 EUR
Company:AGROMA Expert
Seller:Stasyuk Denis Ivanovich
Phones:
Show phone
Write a message
Address:Ukraine, Chernivets'ka Oblast', Chernivtsi

Harvester corn six-row self-propelled on the basis of MTZ-1523. Capacity bunker - 11.5 m3. Unloading height of 3200 mm Performance - 1.4-1.8 ha/hour. Equipment weight is 4500 kg

The harvester is designed to harvest ripe, seed corn, popcorn and milky - wax ripeness. The harvester comes in picking for a quick installation attachments on the tractor, prepared for harvesting ripe, popcorn and seed corn; for cleaning milk waxy maize should be adaptation - revision in parts cleaning cobs.

As the tractor used tractor MTZ-1523 power of 155 HP . The desired number rpm PTO shaft 540/min Length harvesting permanent sections 70 see the Harvester can work and at the required distance in 60-80 see

Technical features

The harvesting section (Reaper) : the number of Assembly series - 6 series; separating bought for them with longitudinal ribs, with adjustable the gap between them 49-79 mm; the number of revolutions of the rolls about 950./min; the Length of the rolls 526 mm, with a tear plates; the distance between the adjustable detachable plates 20-45 mm; Cam drive chains; the number of Cams timing chain 17 pieces; step drive Cams circuit 228 mm; the number of joints of the drive chain 102 pieces; a step joint drive chain 38.1 mm; number of drive circuits 12 pieces; the speed of the driving chains 6.6 km/hour, the Flow of untreated cobs on the tables clean - feed screw 2 pieces; the diameter of the feed screw 330 mm; length of power auger 1620 mm, the rotational speed of 165 o/min; boot silo 2 pieces; length 5300 mm; width 740 mm; transport the speed of the Elevator of 1.18 m/s; cutting - cutting with a horizontally rotating blades; the number of cutting knives 12 PCs; the diameter of the capture of one cutting 570mm; number of revolutions of the knives cutting 1750 o/min; minimum cutting height of the stem 12 cm; minimum length cut the mass of 8 cm; Table of purification - type with rubber rollers purification; the number of partitions of the table of purification 2 pieces; the slope of the buffet purification 12°; number of rolls on one section of 6 pieces; diameter roller 75 mm; the length of the roller 820 mm; The number of revolutions of the roller 290 o/min; performance network beater clamping
part over swaths of purification; the number of axes beater with the stars 3 piece; diameter asterisks beater 330 mm; the ability to adjust the beater height 40 mm; the number of revolutions of the axis of the beater h and h about./minutes; the transport speed of the discharge
Elevator 0,87 m/sec.; drive cleaning section (header); connection on the front Tractor PTO 540 o/min; Drive cleaning section and the discharge of the Elevator -
the connection on the rear of the tractor PTO 540 o/min; semi - silo capacity of 11.5 m3; weight of cobs in bunker 4000 kg; discharge height 3800 mm; the right time to unload 20 seconds; the time of descent of the empty hopper 15 sec; hydraulic equipment purpose: - adjusting the height of the harvesting section
- unloading hopper; the number of connectors on the tractor single; the desired pressure in hydraul. the system 110-130 bar; other features: adjust the distance wheels 2100-2900 mm; the required power of the engine of the tractor 114 kW ( 155 HP );
the grid 24 V; max speed 20 km/h; main dimensions harvester: length 8600 mm; height 3800 mm; width 4200 mm; the total weight of the harvester 4500 kg