The actuator IER-40/63-0,I, IER-40/63-0,I

Let's take a closer look at IER-40, You are interested! To begin with, that will describe the composition of the IER-40. The mechanism consists of a synchronous motor, worm gear, manual drive, the alarm unit position rheostat BSPR, BSPI inductive, BSPT current or BKV block limit switches, lever. Continuing the theme IER-40, for example, the control mechanism may be of two types: contact and contactless. The non-contact method type of control device is starters FGP-3, starters FGP, amplifiers phthalo-0610, amplifiers FC-0620.All information about the legend of mechanisms, nominal torque on output shaft, the nominal time to full speed of the output shaft, the nominal value of the full stroke of the output shaft, power consumption, weight, type of alarm unit the position of the output shaft You will find in the table "Basic characteristics", which is presented in the appropriate section on the company's website.
Yet it should be said that the voltage and frequency of power supply IER-40 - 380 V, 50 Hz degree of protection IP 54 according to GOST 14254. Mode IER-40 - S4, the switch frequency up to 630 per hour when the RO to 5%. Note that the maximum frequency of inclusions IER-40 to 1200 per hour when the RO to 5 %.

If you have any questions - feel free to ask them

The main characteristics of IER-40
Symbol mechanisms
Nominal torque on output shaft
Nominal full stroke of the output shaft
The nominal value of the full speed of the output shaft
Power consumption
Weight
The type of alarm unit the position of the output shaft

N. m
s
g
W
kg

IER-16/10-0.25-K
16
10
0,25
95
8
BSPR, BSPI, BSPT DME

IER-16/25-0.63-C
16
25
0,63
95
8
BSPR, BSPI, BSPT DME

IER-40/10-0.25-K
40
10
0,25
160
8,5
BSPR, BSPI, BSPT DME

IER-40/25-0,25-C
40
25
0,25
95
8
BSPR, BSPI, BSPT DME

IER-40/25-0.63-C
40
25
0,63
160
8,5
BSPR, BSPI, BSPT DME

IER-40/63-0.63-C
40
63
0,63
95
8
BSPR, BSPI, BSPT DME




The voltage and frequency of power supply - 380 V, 50 Hz.

Degree of protection - IP 54 according to GOST 14254.

The mode of operation of the mechanism - S4, the switch frequency up to 630 per hour when the RO to 5%.

The maximum switch frequency up to 1200 per hour when the PV up to 5 %


The designation mechanisms
L, mm
R, mm

IER-40/10-0,25-C
245
100

IER-40/25-0,63-C

The rest of the group

IER-16-C
235
100

IER-40-C