UDG-200
Offer type: salePublished: 28.02.2015
| Price: | 14 700 UAH |
| Company: | OOO 'ASPEKTMASh' |
| Seller: |  Turgan Mihail |
| Phones: |  (097) 865-43-50 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk |
Max. diameter of workpiece, mm 200
The angle of rotation of the spindle in the vertical plane, °:
down from the line of centers 5
- up from the line of centers 95
Cone spindle (Morse taper) No. 3
Thread the working end of the spindle m
Diameter of spindle bore, mm 20,2
Gear ratio worm gear pair 1:40
The diameter of the holes replacement wheels 20 x f9
The number of holes separating disk:
- on one side 16, 19, 23, 30, 33, 39, 49
on the other side 17, 21, 29, 31, 37, 41, 54
Intercept limb direct division, ° 15
The width of the guide dowels, 14 mm
The removable module gears, mm 1.5
The distance from the base of the dividing head to the end of the spindle in vertical position, mm, not more than 235
Diameter three jaw Chuck, 125 mm
Overall dimensions of the base of the dividing head, mm h
Weight, kg 50
The angle of rotation of the spindle in the vertical plane, °:
down from the line of centers 5
- up from the line of centers 95
Cone spindle (Morse taper) No. 3
Thread the working end of the spindle m
Diameter of spindle bore, mm 20,2
Gear ratio worm gear pair 1:40
The diameter of the holes replacement wheels 20 x f9
The number of holes separating disk:
- on one side 16, 19, 23, 30, 33, 39, 49
on the other side 17, 21, 29, 31, 37, 41, 54
Intercept limb direct division, ° 15
The width of the guide dowels, 14 mm
The removable module gears, mm 1.5
The distance from the base of the dividing head to the end of the spindle in vertical position, mm, not more than 235
Diameter three jaw Chuck, 125 mm
Overall dimensions of the base of the dividing head, mm h
Weight, kg 50
