Sell it-1M
Offer type: salePublished: 28.02.2015
| Price: | 11 000 UAH |
| Seller: |  Aleksandr |
| Phones: |  0953666286 Show phone |
| Address: | Ukraine, Zakarpattia Oblast |
The machine model of the it-1M* used for turning and screw-cutting works in the Chuck, centers, as well as on the faceplate. Basically, the machine of this model work for boring, facing, threading module, metric, inch, priceval), drilling, turning etc. When using additional devices on the machine, you can perform milling, boring and grinding work, in particular, grinding grooves, internal grinding, boring hull blanks. Technical characteristics of the lathe, screw-cutting it-1M * Maximum diameter of workpiece, over bed 400 mm * Max. diameter of workpiece over the caliper 225 mm * Max. length of workpiece, mm 1000 * taper in spindle Morse 5 AT * End of the spindle 6K * the Maximum height of the installed cutter, 25 mm * Maximum diameter of the rod, which passes through the hole in the spindle, 36 mm * spindle Speed, rpm 28-1250 * number of spindle speeds 12 * the Limits of working feeds caliper, longitudinal mm / R 0.05-6.0 * the Limits of working feeds caliper, cross-mm / Rev 0.025-3.0 * number of longitudinal feed 50 * number of flows transverse 50 * thread pitch metric, mm 0.25-112 * thread pitch module, the module 0.25-56 * thread pitch inch, thread 1" 56...1 * thread pitch pitteway, pitch 56...1 * motor Power main drive kW 3.12 * machine dimensions, mm 2585 - 960 - 1500
