Radiator aluminum (Ukraine) cast "Elit-500"

New model die-cast aluminum heat sink on overdemocratic prices from plant Santeri" Ukrainian manufacturer of popular radiators series "Mirado"

   Aluminum radiator water heating "Elite-500/70" designed to compete with the many Chinese clones have similar to the range of products of plant Santeri design, but completely dissimilar with them performance and, accordingly, a very low price. In the model of Elite-500/70 cost reduction is achieved solely by reducing depth, and therefore the metal section of the radiator with the 85mm as models "Mirado" and "Diva", to 70mm. The rest is the same reliable domestic heating appliance having an optimum balance of power, price and quality. The radiator "Elite" developed in line with European standards, but given the peculiarities of the Ukrainian heating systems, thanks to which it is a permanent demandon the Ukrainian market. Introduction throughout the production cycle, starting with the design stage of advanced technology and use, during manufacture, equipment and materials of the best in this area foreign enterprises, ensure the product is excellent constructive solution and excellent functional characteristics.

The production of heat sinks are certified and meet Ukrainian and European sanitary standards. Are radiators on the plant Santeri" aluminium high cleaning method of molding that allows to obtain a completely homogeneous structure of the body section. In turn the homogeneity of the metal allows us to achieve unprecedented strength of the section on the gap at the maximum possible for aluminum thermal conductivity. And since the efficiency and heat output of the radiator is directly related to the coefficient the thermal conductivity of the material from which it is made, compare for example Kmah.aluminum=236 W/(m*K) with Kmah.cast iron=63 W/(m*K) and Kmah.steel=47 W/(m*K)), then preferences when choosing batteries for Autonomous systems heating obvious.

When buying any radiator with any number of partitions discount:

- on radiator fittings - 10%

- valves - 5-10%

- on pipes and fittings, PPR - 15%

P.S. Running a professional perekomplektatsiya 10 sectional (factory) radiator in radiators with any number of sections at the request of the customer. When the Assembly is used white biconcave strip to make the connection reliable and practical unnoticeable.

1. Is casting under pressure sections of a radiator made of aluminium alloy brand ACM.

2. Billet sections arrive on automatic Italian line "Saip" running: comprehensive grinding, cutting right/left threads and Assembly in radiators with a given number of partitions (on the nipples of the cold-rolled steel and paronit strips). Then the collected radiators undergo three stages of testing for leaks.

3. The channel for flow of the heat carrier is treated by applying the oxide film, thus increasing the service life of the device, to eliminate the destruction of the walls of the channel under the influence of aggressive environments and reduce gassing (zavozdushivanie) in the heating system overheating the coolant.

4. Is applied first, a protective layer of paint method anafarta by full immersion radiator in the paint bath. This allows the paint to penetrate all pores and deepening the outer surface of the sections and best to protect them from aging and destruction the surface layer of metal.

5. Final painting of the sections is performed by an electrostatic spraying German powder enamel "Freilacke" in Swiss automated spray booth "Gema". The outer coating performed in accordance with European environmental standards and is absolutely safe for consumers under all operating conditions the radiator.

    Specifications

1. Type radiator - sectional, single-channel
2. Brand radiator - Elit-500"
3. The number of sections in the radiator - 10
4. Nominal heat flow (Δt =70*C) - 0,175 kW
5. Thread nipple holes 1 inch
6. Operating pressure of the coolant - 1.6 MPa (16 bar)
7. The radiator is tested to hydraulic pressure of 2.4 MPa (24 bar)
8. Pressure on the gap - 5.0 MPa (50 ATM)
9. Max. coolant temperature - 110°C
10. The weight of one section 1.19 kg
11. The capacity of one section - 0,29 l
12. The dimensions of the section:

height - 560mm
depth - 70mm
width - 80mm

13. Distance - 500mm
14. The cross section of the channel carrier - oval
15. The pH value of the coolant - 6,5 - 9,0 pH
16. Material coupling gaskets - paronite
17. The material of sections - aluminum alloy AK12 M2
18. The material of the nipple - steel grades 08KP, 08ps
19. The color of the outer layer of enamel white RAL 9016