The cast iron radiator (Viadrus, Czech Republic) Termo-500/95

Currently the best, due to its technical characteristics, cast iron radiator in Ukraine and CIS countries. For customers with high requirements to the aesthetics of heating appliances we offer battery Termo-500/95 performed by grinding the front and top sides of the sections and two special epoxy painting enamels, followed by polymerization in an oven at a temperature of 200* (see photos 1-3).

                    The radiator cast iron "T e r m o - 500/95"

High-quality cast-iron sectional series battery "TERMO" are for Central heating systems with natural and forced circulation of water, with a maximum operating temperature of 115*and maximum working pressure of 0.9 MPa. Perhaps their use in steam heating systems with a maximum operating excessive steam pressure of 0.07 MPa.

In the production process each section separately and heat sink Assembly tested for tightness with water under a pressure of 1.5 MPa. All the sections of the radiator, in the center third of the canal - side, embossed embossed three vertically spaced letters ZDB (Zavod Bohumin) the same the abbreviation is available on the passport of Czech radiator and any documentation related to it. Such information enables alert buyer to avoid buying low quality copies or outspoken Chinese counterfeits (see photo 4 and 5). Radiators series "THERMO" is widely used in residential and industrial premises. They heat the building in England, Germany, France, and Russia, Ukraine, Belarus, etc. And in the Czech Republic and the countries of the former CMEA they are the most common type of radiators.

Model Thermo-500/95 is a triple radiator high class modern design. Unlike domestic model MS-140 is reduced by 60% the capacity of the section at lower heat capacity is only 25%, which means an increase in efficiency more than 2 times and allows you to achieve significant savings in fuel and high the heating rate of the room. Reduced thermal inertia model Thermo-500/95 allows you to set these radiators along with aluminum in any closed (individual) heating systems, including automatic temperature control.

Have questions? Come and visit us or call us on phone: 050-5856183 and we will try to answer them
More information on: bullrad.prom.ua

When buying any cast iron radiator with any number of partitions discount:

- on radiator fittings - 10%

- valves - 5-10%

- on pipes and fittings, PPR - 15%

P.S. Running a professional perekomplektatsiya 10 sectional (factory) radiator in radiators with any number of sections at the request of the customer. When the Assembly is used white biconcave strip to make the connection reliable and practical unnoticeable.

          The advantages of cast-iron radiators series "T e r m o

- corrosion resistance - casting sections of high quality foundry cast iron

- increased service life of the radiator wall thickness of the section of 2.5 mm to 8.0 mm

- reduced the roughness of the outer and inner surfaces of the section - iron casting under pressure

- no shells or "capillaries" in the casting sections - iron casting under pressure

- modern design - depth sections 95mm + flat front radiator with a gap between sections 4-7mm

- high heat with minimum dimensions - section three vertical channel with heat transfer fluid

the direction of heat radiation into the room - the expanded surface of the front side section

- low probability of leakage nipple joints - coupling strip paronit

- can be installed in buildings with a high pressure - oval cross-section channels

any thermal power battery - Assembly required number of sections 1 radiator

- easy installation - radiators can be mounted on the wall using brackets or mounted on racks

The plant of heating equipment "VIADRUS", JSC "ZDB a.s." produces radiators since 1890 and is one of the the largest in Europe. The high quality shows assigned to the plant of the international certificate of quality management system ISO 9001, ISO 14001. Thermal power sections tested experimentally in a test lab "TZB" in Prague.

    Specifications

1. Type radiator - sectional channel
2. Brand radiator Thermo 500/95
3. The number of sections in the radiator - 10 (any)
4. Nominal heat flow (Δt =70oC) - 120 watts
5. The diameter of the nipple holes 1 inch
6. Operating pressure of the coolant - 0.9 MPa (9 kgf/cm2)
7. The radiator is tested by hydraulic pressure to 1.5 MPa (15 kgf/cm2)
8. The maximum temperature of 115°C
9. The weight of one section of 4.35 kg
10. The capacity of one section - 0,6 l
11. The dimensions of the section:

height - 560mm
depth - 95mm
width - 60mm

12. Distance - 500mm
13. The surface area of 1 section 0,m
14. Gasket material - paronite