Semi-automatic edge banding machine RE-20

Semi-automatic edging machine PARTNER RE-20 is equipped with a feed mechanism edges and pneumovirinae, adjustable feed speed, convenient digital display electronic control unit. The nodes of the semi-works with edge allow to increase the productivity of the site of krakovany. Device automatic submission of edges consists of: rulonoderzhatelya for edges, the pressure and feed rolls, guillotine for rough cuts. From shop edge is fed by the rollers in the area of bonding. Guillotine cuts edge so that its length was enough to close the entire edge of the workpiece and leave a seam allowance.
Manufacturer: Ukraine, the Company "PARTNER", , Chernigov, web:partner.cn.ua

Functionality:
• Automatic feed of edging material from the roll and mechanism of end trimming.
• Cutting off the required length of the edge is made by the knife of the guillotine (hardened steel 65G) with limit switch or pedal, depending on the line or radius of the workpiece.
• Electronic speed control feed edge from 3 to 7 m/min, allowing you to select the optimum feed speed, especially important when trimming blanks with radii, long parts.
• Electronic thermostat that can precisely adjust the temperature of the adhesive.
• Two independently controlled heating element (shaft and the tank), this advantage provides a constant temperature hot-melt gluing rollers on the shaft, which provides better adhesion.
• In menu mode, standby, allowing you to maintain the adhesive in a heated state at a lower temperature during breaks at work.
• Power supply: single-phase household AC 220V, industrial network 380.
• To operate a compressor.

Specifications:
The thickness of the edging material from 0.4 to 3 mm

The width of the edging material from 16 to 55 mm

The feed rate of railing from 3 to 5 m/min

External workpiece radius is not limited.

Internal workpiece radius of 25 mm

Bath of hot melt glue - volume 3 kg

Electronic temperature control up to 500 °C.

The temperature measurement error of 0.1 °C.

Management cuts edges pedal/footer.

Power supply 220V/380V.

Power consumption 2.2 kW.

The net weight of machine 105 kg

On all equipment covered by the manufacturer's warranty 12 months carry out service maintenance and post-warranty service and repair.
In addition to the machines, we always, You can find assortment of accompanying material to the equipment, hand tools supplies industrial, glue Jowat.

Also, when buying edge banding machine manufacturer for the consumer always has confidence in the quality of the equipment and that he buys exactly the model that fits Your size and needs.