planter HRC-8

Pneumatic precision planters planting HRC-8 is designed for precision planting
row crops dashed method according to one or two beans in the slot given
the distance between nests. Thanks to a wide range of planter seed disks can
to carry out the sowing of maize, sunflower, peas and other crops with similar forms and
the size of seeds, with wide row spacing 45-70cm. Planter type of HRC-8FS boudouani device
for simultaneous, with seeding, soil and mineral granular
fertilizers.
Advantages drills like the HRC-8FS:
1. When connecting the PTO, the exhauster comes in
movement, thereby creating a vacuum pressure, which
through hoses low pressure creates in the chamber
the vacuum seed meter vacuum. Thanks
vacuum, the seeds that are in the feed chamber,
are attracted to the holes of the seed disks.
If the machine moves the disks are driven.
Rotating, they move seeds to the device entering them into the soil. Seeds captured
drive, pass, adjustable stripper which removes excess grains, leaving only
one or two beans in each hole of the seed disk.
2. Simultaneously with the introduction into the soil of the seed, there is
the possibility of application of mineral fertilizers by
device that allows you to adjust the rate
fertilizers, depending on the quantity required for one hectare
and type of fertilizer.
3. In order to increase the reliability of the transmission device for
depositing fertilizer and seed into the soil, were installed reinforced
drive sprocket and chain.
4. To improve performance and exclude manual
in the process of planting, markers were equipped with hydraulic
a system that gave the opportunity to manage tokens from the cab
the tractor.
Specifications:
The capacity, ha/h 1,7-4,48
Work width, m 5,6
Depth of sowing, 2-12 cm
The width of aisles, 45-70 cm
Number of rows 8
Working speed, km/h 6-8
Overall dimensions, m 1,75*5,8*2,5
Weight kg 1200