Manual welding extruder 2007 CS, HERZ Germany
Offer type: salePublished: 07.03.2013
| Seller: |  Kurenkova Nataliya Aleksandrovna |
| Phones: |  Write a message |
| Address: | Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk |
Professional, hand extruder with separate digital control the mass and temperature of the air and built-in air supply for welding rod materials PE, PP, PVDF, PVC.
THE QUALITY IS IN THE DETAILS !
for rod 4mm - Art.-Nr.: DX260
for rod 5mm - Art.-Nr.: DX260.5 (except welding PVC)
The advantages of the device:
• Built-in air supply.
• Built-in thermal protective shield between the body of the extruder drive.
• Unique, patented temperature measurement directly in the melt.
• Exhibited temperature and mass with minimal deviation from the target value.
• Low weight due to the production of lightweight materials.
• Much less wearing parts in comparison with other extruders.
• Screw mechanism.
• Built-in protection at cold start of the extruder performs two functions:
- protection of the drive and auger.
- avoid errors when the deviation from the set temperature.
• Digital display of set and current temperature.
• Separate control of the temperature of the mass and air temperature
THE QUALITY IS IN THE DETAILS !
for rod 4mm - Art.-Nr.: DX260
for rod 5mm - Art.-Nr.: DX260.5 (except welding PVC)
The advantages of the device:
• Built-in air supply.
• Built-in thermal protective shield between the body of the extruder drive.
• Unique, patented temperature measurement directly in the melt.
• Exhibited temperature and mass with minimal deviation from the target value.
• Low weight due to the production of lightweight materials.
• Much less wearing parts in comparison with other extruders.
• Screw mechanism.
• Built-in protection at cold start of the extruder performs two functions:
- protection of the drive and auger.
- avoid errors when the deviation from the set temperature.
• Digital display of set and current temperature.
• Separate control of the temperature of the mass and air temperature
