Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  control equipment

DD, DPP-2M, PIP-M, RISM, ROS, ROS-501, RUPTIME-RS, SAPPHIRE do, SIGMA, SPAS, SUS, UBE-M1, WBEM, URBP,

Offer type: salePublished: 12.03.2013
Seller:Megapribor Megapribor
Phones:
Show phone
Write a message
Address:Russian Federation, Moskovskaya Oblast', Moscow
LLC MEGAPRIMER" (495) 974-07-72 , 974-74-13
WWW.megapribor.biz
e-mail: 9740772@bk.ru
DD Transducer differential pressure pneumatic
Converter pneumatic pressure difference DD is designed to transmit information in the form of a standard pneumatic signal (20-100 kPa) on pressure drop, the flow rate of liquids and gases, control systems and process control with a potentially explosive conditions. The devices are products of SHGs and operated in conjunction with a secondary registrars and regulators working from the standard signal 20 to 100 KPa. Converters DD widely used in chemical, oil refining, petrochemical industry, power engineering and other industries. In terms of resistance to mechanical stress transducer corresponds to the execution group L3 according to GOST R. The ingress protection IP54 according to GOST 14254.
DPP-2M CONVERTER DIFFERENTIAL PRESSURE PNEUMATIC
GST 42 1252 ; THE 4212-033-42334258-2005
Converter pneumatic pressure difference DPP-2 is designed to transmit information in the form of a standard pneumatic signal (20-100 kPa) on pressure drop, the flow rate of liquids and gases, control systems and process control with a potentially explosive conditions. The devices are products of SHGs and operated in conjunction with a secondary registrars and regulators working from the standard signal 20 to 100 KPa. Converters DPP-2 is widely used in chemical, oil refining, petrochemical industry, power engineering and other industries.
In terms of resistance to mechanical stress transducer corresponds to the execution group L3 according to GOST R. The ingress protection IP54 according to GOST 14254.
PIP-M LEVEL TRANSDUCERS PNEUMATIC DISPLACER
GST 42 1422 ; THE 4214-032-42334258-2005
Level transducers measuring buoy pneumatic PUP, further converters, designed to operate in systems of automatic monitoring, management and control of manufacturing processes with the aim of producing information in the form of a standard pneumatic signal of the liquid level (models 11, 12, 13, 14, 15) or the interface of two immiscible liquids (21, 22), under vacuum, atmospheric or positive pressure.
FIGURE M SENSORS-LEVEL INDICATORS
GST 42 1874 ; THE 4218-035-42334258-2005
Sensors, indicators, and the indicators are designed to control the level of liquid and solid (granular) media in the systems of automatic control, regulation and control of technological processes, including explosive production conditions.
Indicator of performance And is intended for use at nuclear facilities (UAE).
GREW 501 SENSOR-LEVEL SWITCH
GST 42 1421 ; THE 4218-016-42334258-2007
Sensor-level switch RS-501, RS-I are designed for level control of liquids with density not less than 0.52 g/cm3 and a two-position control mechanisms in stationary and marine conditions, including nuclear (UAE).
RUPT-MN-RS SYSTEM MULTICHANNEL MEASUREMENT OF LIQUID LEVEL AND INTERFACE ENVIRONMENTS
GST 42 1498 ; THE 4214-009-42334258-98
Multi-channel measurement of liquid level and interface media Rupt-MN-RS is designed for measuring liquid level, interface between two liquid media with different densities, including high-viscosity petroleum products and liquefied gases in tank farms.
SAPPHIRE-MP DO LEVEL TRANSDUCERS BUOY ELECTRIC
GST 42 1421 ; THE 4214-019-42334258-2006
Converters Sapphire-MP do is designed to work in systems of automatic control, regulation and control of technological processes, including hazardous conditions and provide a continuous transformation of values of the measured fluid level (models 2620, 2622, 2630, 2640,2642, 2650) or level of the interface between two liquid phases (model 2615), both neutral and aggressive media in the standard current and (or) digital based on the HART Protocol output signal for remote transmission.
SIGMA-4 SYSTEM MEASURING HYDROSTATIC
THE 4218-044-42334258-2007
The measuring system hydrostatic SIGMA-4, the "system", is designed to measure the mass of oil, oil products (fuel oil, gasoline, and so on) and other fluids, hereinafter "products", in measures of capacity (tanks) without vacuum and overpressure.
The main area of use - oil storage, kasutajanimi, petrol stations.
SPAS-24 SYSTEM WARNING-AVARIINOI ALARM (DETECTION OF WATER IN THE HOLD OF A SHIP)
THE 4214-030-42334258-04
System warning-alarm (detection of water in the holds) SPAS-24, hereinafter system, is designed to detect the appearance of water in the cargo holds and other spaces of ships, including bulk carriers and tankers.
The system consists of sensors, the presence of water
DNV-2 (up to 24 pieces), remote control and display ISPS-24.
WM-100 POINT LEVEL SWITCH
GST 42 1874 ; THE 4218-026-42334258-03
Level switches WM-100 is designed for level control of conductive and electroconductive liquid, solid (dry) environments, grain and products of its refining. Provide an alarm of "presence" or "absence" controlled environment at the prescribed level.
UB-AM, UB-AM AND LEVEL TRANSDUCERS BUOY ELECTRIC
GST 42 1421 ; THE 4214-010-42334258-2005
Converters UB-AM are designed to work in systems of automatic control, regulation and control of technological processes, including hazardous conditions and provide a continuous transformation of values of the measured fluid level (models 2620, 2622, 2630, 2640, 2650) or level of the interface between two liquid phases (model 2615), both neutral and aggressive media in the standard current and (or) digital based on the HART Protocol output signal for remote transmission.
URB-N URB-PM LEVEL REGULATORS PNEUMATIC DISPLACER
GST 42 1422 8088 ; THE 4214-008-12176419-96
Level controllers pneumatic displacer URB-N URB-PM, then the sensors are designed to work in systems of automatic monitoring, management and control of manufacturing processes with the aim of producing information in the form of a standard pneumatic signal of the liquid level (URB-P) or the position of the interface between two immiscible liquids (URB-PM), under vacuum, atmospheric or positive pressure.
ERSU-6M ELECTRONIC CONTROLLER-LEVEL SWITCH
GST 4218 ; THE 4218-036-42334258-2006
Electronic controller level switch ERSU-6M is designed to alarm and keep within the prescribed limits of the level of conductive liquids in six points in one or six tanks. ERSU-6M Differs from the device ROS-301, ERSU-SP number of controlled points and the upper value of the resistance of the trigger to hookom, an adjustable trigger.
DEC-100M, DMPK-AM TRANSDUCERS DIFFERENTIAL PRESSURE DIAPHRAGM PNEUMATIC COMPENSATION
GST 42 1222 2038 ; THE 4212-004-12176419-2007
Transducers differential pressure diaphragm pneumatic compensation DMPK - 100M, DMPK-AM are designed to work in systems of automatic monitoring, management and control of industrial processes in the petroleum, gas, chemical and other industries in order to receive information in the form of a standard pneumatic signal of the differential pressure, the flow rate of liquids and gases, and the liquid level.
OTHER 1RM Sensor, liquid level switch
GST 42 1874 ; THE 4218-022-42334258-02
Sensor, liquid level switch OTHER 1RM is designed to control the level of water, diesel fuel, aviation oils, and other liquids with a dynamic viscosity of not more than 2.4 assists and a density of at least 0.8 g/cm3, not aggressive towards 12X18H10T steel and rubber.
Fire safety sensor-level switch has no ability to auto-ignition and cause burning.
MCT 5M TRANSDUCER MEASURING OVERPRESSURE
GST 421281 ; THE 4212-028-42334258-2005
The Converter is designed for measurement of gauge pressure environments, not aggressive to steel 12X18H10T and titanium alloys VT, VT3-1, W-20 in systems of automatic control, regulation and control of technological processes in various industries.
The Converter consists of measuring and electronic components housed in a common housing.
RDU-x2, RDU-X8 RADAR LEVEL SENSORS
GST 42 1434 ; CRPG. 407529,001 THE RDU-x2 ; THE 4214-041-42334258-2007 RDU-X8
Radar level sensors, and the sensors are designed for continuous non-contact level measurement of large vessels in standalone mode, and APCS.
GREW 400-4, 400-6, GREW 400-7, GREW 400-8 LEVEL SENSORS FLOAT ELECTRIC
GST 42 1874 ; THE 4218-024-42334258-2005
Level sensors GREW 400-4, ROHS-6, ROS 400-7, GREW 400-8 is designed to control the level of liquids in tanks, transport and commercial vessels, other spacecraft, and vessels of the signal in the circuit of the alarm, control and protection of different objects, including objects of atomic energy (UAE).
Level sensor, Rupt-AM (FLOAT level GAUGE)
GST 42 1434 ; THE 4214-031-42334258-04
The level of Rupt-AM is designed to:
continuous conversion level and section level of liquids in a standard current signal; 0-5; 0-20; 4-20mA;
determining the temperature of liquid media (definition of temperature is carried out with unlimited precision);
determine the amount of the controlled medium in the tank with unlimited precision.
digital display of one of the parameters (level in mm, the partition level in mm, temperature in °C, the volume of the unit specified in the calibration table) or all of these parameters on the queue;
visual and relay (dry contact) alarm custom 4 alarm levels environments