Machine SPO-40M/3-6 - this is a modification of the machine SPO-40/3-6, designed to work with smooth wire, which is widely used in the production of consumer goods, commercial equipment, etc.,
Engineers scientific-production Association "Restroute" combined 2 types of properly cutting equipment and decided the task in the following way: taking advantage of the various methods of dressing, they created a new machine meets the requirements of manufacturers of commercial equipment.
As the base sample was taken from the serial model of the machine SPO-40 and finalized the following sites:
• host a preliminary two-axis changes with adjustable hold-down rollers;
• a set of pickup and feed rollers;
• rotary drum using special dies (crackers) from caprolon that do not leave grooves and does not distort the surface of the rod;
• frequency Converter for braking the drum at the time Ruba (increases accuracy Ruba);
• encoder instead of the end of the sensor (allows you to set the cut length from the remote control with accuracy up to 1 mm).
A new machine called "SPO-40/3-6 modified (act-40M/3-6). The test results became known technical capabilities of the machine. The minimum length of the Ruba - 20mm, maximum recommended mm. The average speed edits 30-50 m/min Performance of 1-1 .5 tons per 8 hours. Works with wire diameters from 3 to 6 mm When installing nozzles from high-strength alloy VK-8 (tungsten-cobalt), the machine can also work with wire class BP.
Specifications
The wire diameter mm3-6
Speed edits, m/min - 50
Cutting accuracy>±2.5 mm from the specified size
The supply voltage, V, 50 Hz
Power, KWt.5
Air consumption l/C
The pressure in the pneumatic system, MPa.6
Weight, kg
The machine is supplied in the following standard:
• Straightening and cutting machine
• Buccodental
• Control unit
• Emission line length 3 m
Video:
http://www.youtube.com/watch?v=w-ShfAhzDYU&list=UL
http://www.youtube.com/watch?v=-nmsJGBD7N0&list=UL
More detailed information can be found on the website of the manufacturer rosstroytech.ru).