Thermal mobile station with rotary heat
Offer type: salePublished: 28.03.2013
| Seller: |  Zdorovenko Vladimir Il'ich |
| Phones: |  Write a message |
| Address: | Ukraine, Kharkivs'ka Oblast', Kharkiv |
Thermal power station FCM production company "Reprobative"
Thermal power station FCM is a promising and inexpensive source of heat. The thermal energy is based on the physical principle of converting one form of energy into another. The mechanical energy of rotation of the motor is transmitted to the disk cavitator is the main working body of the heating plant. The fluid inside the cavity of the cavitator is twisted, gaining kinetic energy. Then, when braking fluid, cavitation occurs. The kinetic energy is converted into heat, thereby heating the fluid to a temperature of not less than 95 degrees Celsius.
Thermal power station FCM-M include a standard asynchronous motor power 11,22,30,37 kW (3000 rpm, voltage 380 V)., mounted on one frame with a disk cavitator, which converts mechanical energy into heat and the heat control and automation.
The application of heat station TSM for space heating has the following advantages:
- does not require additional permits for their installation, as thermal power stations operate on the basis of the factory motor and structurally represent one type of centrifugal pump. Electricity is used to rotate the motor, and not for direct heating of the heat carrier.
- during operation there are no emissions into the atmosphere, as they operate in a sealed system filled with ordinary tap water without any additional training;
- does not require constant presence of staff, thermal power stations operate in the automatic mode;
- the conversion of electrical energy into thermal energy does not change during the whole life SCI, because when their work does not form scale and there are no other phenomena lead to the deterioration of operating modes;
- Heat station SCI reliable explosion - fire-safe, environmentally friendly, compact and have the time to overhaul installed on SCI generator is not less than 8 years.
- FCM is placed on a movable cart and can be installed in any location protected from the exterior of rainfall. The time to connect to an existing heating system is not more than 3 hours;
- FCM can be used in hot water systems. It is additionally equipped with a plate or tubular heat exchanger;
Space heating using thermal stations FCM is a cost-effective cost. For example, when heating 500 square meters to a temperature of 18-20 degrees Celsius one station SCI-30M heating costs per square meter per month will be 5-7 USD. when the electricity rate of 0.36 USD per 1 KW and an ambient temperature from -10 to -20 Celsius
and 2.5 - 5 UAH. when ambient temperatures from 0 to -10 degrees
When the heating of the storage tank, FCM can be used only at night, when ( with the appropriate meter) cost of electricity is 30% from the existing rate, and therefore the total financial costs during the heating season can be reduced by 40 - 60 %;
Thermal power station SCI available power of the motor: 11; 22; 30; 55; 75 and more kW depending on the need.
Thermal power station FCM is a promising and inexpensive source of heat. The thermal energy is based on the physical principle of converting one form of energy into another. The mechanical energy of rotation of the motor is transmitted to the disk cavitator is the main working body of the heating plant. The fluid inside the cavity of the cavitator is twisted, gaining kinetic energy. Then, when braking fluid, cavitation occurs. The kinetic energy is converted into heat, thereby heating the fluid to a temperature of not less than 95 degrees Celsius.
Thermal power station FCM-M include a standard asynchronous motor power 11,22,30,37 kW (3000 rpm, voltage 380 V)., mounted on one frame with a disk cavitator, which converts mechanical energy into heat and the heat control and automation.
The application of heat station TSM for space heating has the following advantages:
- does not require additional permits for their installation, as thermal power stations operate on the basis of the factory motor and structurally represent one type of centrifugal pump. Electricity is used to rotate the motor, and not for direct heating of the heat carrier.
- during operation there are no emissions into the atmosphere, as they operate in a sealed system filled with ordinary tap water without any additional training;
- does not require constant presence of staff, thermal power stations operate in the automatic mode;
- the conversion of electrical energy into thermal energy does not change during the whole life SCI, because when their work does not form scale and there are no other phenomena lead to the deterioration of operating modes;
- Heat station SCI reliable explosion - fire-safe, environmentally friendly, compact and have the time to overhaul installed on SCI generator is not less than 8 years.
- FCM is placed on a movable cart and can be installed in any location protected from the exterior of rainfall. The time to connect to an existing heating system is not more than 3 hours;
- FCM can be used in hot water systems. It is additionally equipped with a plate or tubular heat exchanger;
Space heating using thermal stations FCM is a cost-effective cost. For example, when heating 500 square meters to a temperature of 18-20 degrees Celsius one station SCI-30M heating costs per square meter per month will be 5-7 USD. when the electricity rate of 0.36 USD per 1 KW and an ambient temperature from -10 to -20 Celsius
and 2.5 - 5 UAH. when ambient temperatures from 0 to -10 degrees
When the heating of the storage tank, FCM can be used only at night, when ( with the appropriate meter) cost of electricity is 30% from the existing rate, and therefore the total financial costs during the heating season can be reduced by 40 - 60 %;
Thermal power station SCI available power of the motor: 11; 22; 30; 55; 75 and more kW depending on the need.
