Cable Jack to 8 tons

Jack cable DK-GP powerful mobile lifting device, designed for installation and lifting cable drums from 10 to 32 size. The maximum capacity of this type of cable jacks for up to 8 tons. Cable DC Jack-GP can be used as a radiating device when rewinding and cabling.

Hour cable DC Jack-GP is a welded structure made of angular steel, equipped with wheel bearings for easy movement on the ground. Lifting drums at the required height is due to the efforts of the created hydraulic jacks. Securing the axle in the racks, and working hydraulic pump, is the rise of the cable drum weighing not more than 8 tonnes.

Through the Central hole of the cable drum is inserted the axle Jack axle set centering cone or sleeve, gland shoes move along the axis to the cheeks of the drum and fixed by the clamp. Rack cable Jack installed on both sides of the drum, providing a working gap between the cheek drum and stand design. A significant increase in this gap will result in an increase in bending moment on the axis and, as a result of possible damage. Next, combine the cradle axis and activates the lifting mechanism, in this case the hydraulics. The rise is the height of providing compensation for irregularities cheeks drum, plus a guaranteed clearance between the cheek and the surface on which the stand rack, usually of the order of 50-100 mm.

Specifications hydraulic Jack cable

Load capacity, kg: 8 000
The diameter of the cable drum (min), mm: 800
The diameter of the cable drum (max), mm: 3200
The width of the cable drum (max), mm: 2000
The diameter of the cross, mm: 89
The weight of the cross from kg: 35
The total weight of the Jack, kg: 215

Status: in stock Kiev