Bizator  /  Adverts  /  metallurgy industry  /  miscellaneous

Will sell the Rails R 50 storage without deterioration 6500 negotiable!

Offer type: salePublished: 28.02.2015
Price:negotiated
Company:OOO"Stal' Soyuz"
Seller:Koval' Dmitrij Igorvich
Phones:
Show phone
Write a message
Address:Ukraine, Kyiv

Will sell the Rails R 50 storage without deterioration 6500 negotiable!

In the presence of 26 units of 12.5 m

- Rails R50 are divided into tempered and untempered
they can be manufactured without holes in the neck, without hardening the surface of the head as on one or both ends, if desired by the customer.
- also the location of the holes may be different than shown in the drawings below, if necessary.
- if the sole has a concave profile, this is an unacceptable defect, concavity is not allowed.
- the maximum deviation of convexity of the head should not exceed 5mm along the axis of the cross. profile.
-the holes in the neck should have an edge in the range of 1.5-3 mm, at an angle equal to 45 degrees.
- also must be the chamfer, if is objenossine
Rail R50 GOST 7174-75 is a technical designation.
As can be roughly classified according to the lengths specified in table 1, there are also permissible variation in length.