Solid fuel boiler Alta CT-3E 250
Offer type: salePublished: 27.02.2015
| Price: | 69 400 UAH |
| Company: | gaz-kotly@rambler.ru |
| Seller: |  Arno Borisovich |
| Phones: |  0502227027 Show phone |
| Address: | Ukraine, Luhans'ka Oblast', Luhansk |
Solid fuel boiler Alta CT-3E 250
Design
boiler allows you to effectively use the heat of combustion of different types
fuel is preferable to use charcoal and firewood, but thanks
the universality of the produced models, as effectively can
use wood waste, sawdust and peat briquettes, straw.
Increased
the stoking door allow you to use a large fraction of the fuel, and
sophisticated additional thermal protection protects against burn-out.
Top
method of burning solid fuel, which provides for a series of CT-3E,
it is considered safer from an environmental point of view. This method
at the same time provides high efficiency equipment.
The process
combustion automated, and for the cycle of operation of the boiler meets
microprocessor controller, and staff performs at least
action: daily clean the boiler from the ashes and once again loads of fuel.
Features:
- Equipped with 3-channel (for boilers 14-97 kW) or 5-channel (125-350 kW) heat exchanger puts boilers series CT-3RD in the discharge unique because unique for this equipment in Ukraine.
thermal insulation. Ensures safe and efficient operation and increases the duration of the service.
- Convenient access panels. Make it easy to access and quick cleaning of the furnace and convection channels from ash and ash.
- Large boot door. Enable the use of the coarse fraction fuel without grinding.
- Thermal protection. Doors and hatches boiler equipped with additional thermal protection, which increases the efficiency of the equipment.
- The duration of burning. Increased the size of the combustion chamber and the fans provide a long burning and allows you to get your boiler times per day.
- Automation. Automatic control of the combustion process, particularly, the preset temperature and the operation of the pump.
- Equipped with 3-channel (for boilers 14-97 kW) or 5-channel (125-350 kW) heat exchanger puts boilers series CT-3RD in the discharge unique because unique for this equipment in Ukraine.
thermal insulation. Ensures safe and efficient operation and increases the duration of the service.
- Convenient access panels. Make it easy to access and quick cleaning of the furnace and convection channels from ash and ash.
- Large boot door. Enable the use of the coarse fraction fuel without grinding.
- Thermal protection. Doors and hatches boiler equipped with additional thermal protection, which increases the efficiency of the equipment.
- The duration of burning. Increased the size of the combustion chamber and the fans provide a long burning and allows you to get your boiler times per day.
- Automation. Automatic control of the combustion process, particularly, the preset temperature and the operation of the pump.
Features
Features
Warranty:
ask Manager
Duct, mm:
435
Efficiency:
81%
Max. working pressure, MPa:
0.2
Minimum chimney height, m:
12
Water volume, l:
869
The volume of the combustion chamber, l:
650
Heating area, square meters:
2500
The size of the furnace, mm:
H
A single load of fuel, kg:
585
The cross section of the duct, mm:
1460
The water outlet temperature, °C
90
Thermal power, kW:
250
Fuel type:
anthracite, bituminous coal primary / peat, firewood, Euro briquettes, straw, wood chips - alternative
Chimney draught, PA:
45-50
The operating time on one load hour:
8-24
The size of the boot opening, mm:
H
Weight, kg:
2165
Dimensions, mm:
HH
