OST "the Director Astrahan" single-Threaded packing machine Pneumatic-42 for packaging in packages "Stick"
Offer type: salePublished: 26.01.2017
| Seller: |  Gerasimenko Sergej Viktorovich |
| Phones: |  +38 095 001 22 21 Show phone |
| Address: | Ukraine, Chernivets'ka Oblast', Chernivtsi |
Purpose: the Machine is designed La automatic filling and packaging bag type "Stick" from a roll of laminated paper.
Packaged products: Engineering, fine-grain, melodyssey - sugar, salt, spices, Supplements.
Packaging materials: Canvas roll - laminated paper
The design of the package: "Stick" with two transverse and one longitudinal seam.
Working principle: the Film is unwound from the roll, passes through the shaft tensioner, through the control zone photo tags On the collar shaper flat film rolled in a tube. Propivaetsya longitudinal/middle seam. Further, the horizontal node sponges prepaymet film two transverse seams and makes an incision between them. When Packed the previous packet and sealed the bottom of the next package. When a new packet is generated, the machine instructs the dispenser to discharge the dose. Dispenser pouring out a dose of product through the cone into the prepared package. Simultaneously, there is a drawing package to the desired length. The length is controlled by photomatt, which is printed on the film or on the parameters of the packet length without photo tags specified in the controller of the machine. After filling with product and transport package, the machine gives the command and the node horizontal jaws starts next automatic cycle - Packed the previous packet and sealed the bottom of the next package.
Operator: the Operator falls asleep or controls the filling of the product in the hopper. Sets the film and sets up the formation of the package. Sets the dose, and other variables. Fold the finished pack, packing group (if you have not set the option group packaging).
Video on this machine: http://video.i.ua/user/1104419/68478/
Features
Main
Country of origin Ukraine
Method of soldering a seam constant heat
Batching limit 10.0 (g)
Maximum performance 40.0 (PCs/min)
Regulation of the heating temperature soldering site Yes
The changing volumes of the "glasses" of the dispenser Yes
The amount of dose 12.0 (CC)
The maximum packet length 120.0 (mm)
The maximum width of the package 18.0 (mm)
Packaging material paper
The diameter of the roll 400 (mm)
Power consumption 0.7 (kW)
Air flow 200.0 (liter/min)
Network settings
Voltage 220.0 ()
Frequency 50.0 (GHz)
General settings
Weight 90.0 (kg)
Length 1000.0 (mm)
Width 500.0 (mm)
Height
Packaged products: Engineering, fine-grain, melodyssey - sugar, salt, spices, Supplements.
Packaging materials: Canvas roll - laminated paper
The design of the package: "Stick" with two transverse and one longitudinal seam.
Working principle: the Film is unwound from the roll, passes through the shaft tensioner, through the control zone photo tags On the collar shaper flat film rolled in a tube. Propivaetsya longitudinal/middle seam. Further, the horizontal node sponges prepaymet film two transverse seams and makes an incision between them. When Packed the previous packet and sealed the bottom of the next package. When a new packet is generated, the machine instructs the dispenser to discharge the dose. Dispenser pouring out a dose of product through the cone into the prepared package. Simultaneously, there is a drawing package to the desired length. The length is controlled by photomatt, which is printed on the film or on the parameters of the packet length without photo tags specified in the controller of the machine. After filling with product and transport package, the machine gives the command and the node horizontal jaws starts next automatic cycle - Packed the previous packet and sealed the bottom of the next package.
Operator: the Operator falls asleep or controls the filling of the product in the hopper. Sets the film and sets up the formation of the package. Sets the dose, and other variables. Fold the finished pack, packing group (if you have not set the option group packaging).
Video on this machine: http://video.i.ua/user/1104419/68478/
Features
Main
Country of origin Ukraine
Method of soldering a seam constant heat
Batching limit 10.0 (g)
Maximum performance 40.0 (PCs/min)
Regulation of the heating temperature soldering site Yes
The changing volumes of the "glasses" of the dispenser Yes
The amount of dose 12.0 (CC)
The maximum packet length 120.0 (mm)
The maximum width of the package 18.0 (mm)
Packaging material paper
The diameter of the roll 400 (mm)
Power consumption 0.7 (kW)
Air flow 200.0 (liter/min)
Network settings
Voltage 220.0 ()
Frequency 50.0 (GHz)
General settings
Weight 90.0 (kg)
Length 1000.0 (mm)
Width 500.0 (mm)
Height
