Hardness dynamic UCB T-D1
Offer type: salePublished: 24.03.2014
| Seller: |  Lazarenko Dmitrij |
| Phones: |  (056) 767-05-09 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast', Novomoskovsk |
Hardness dynamic UCB T-D1
Designed for rapid non-destructive testing of hardness:
•metals and alloys on standardized in the CIS hardness scales: Rockwell (HRC), Brinell (HB), Vickers (HV);
•metals with different properties from steel (for example, non-ferrous metals, alloys, cast iron and other) with five additional scales for calibration;
•using a scale of tensile strength (Rm) in accordance with GOST 22791-77 to determine the ultimate tensile strength of products made of carbon steel pearlitic class by automatic recalculation on the scale of hardness Brinell (HB);
The dynamic hardness tester implements a method rebound (Liba). Dynamic hardness tester the most simple and inexpensive Durometer of all portable portable hardness testers.
Durometer allows you to measure the hardness of metals and alloys with a weight exceeding 5 kg (without additional operations).
Advantages of dynamic hardness tester UCB T-D1 •
•measure the hardness of materials with heterogeneous, coarse-grained structure, forged products, castings, cast iron
•high performance in the measurement of hardness
•wide range of hardness measurement
•convenience and ease of measurement of hardness
•the minimum number of controls
•graphic display with backlight, monitoring the status of the battery
•automatic detection of the sensors, indication of the type of the connected sensor
Hardness dynamic T-1 is the most accessible metal hardness tester. The hardness tester is simple to set up and easy to operate. The hardness measurement dynamic hardness tester takes no more than 10 seconds, which provides high performance controls in hardness measurements. We must remember that the dynamic hardness tester has a number of restrictions on weight and size of the object of control. For measuring the hardness of the small details we recommend the use of ultrasonic hardness tester.
Hardness dynamic T-1 is the base model hardness tester, there is also an enhanced version of a Durometer T-D2. The Durometer of the T-2 has a memory, the PC communication mode and extended temperature range.
Limitations of dynamic hardness tester UCB T-D1
Measurement items weighing less than 3 kg or thickness less than 12mm is possible only if the following conditions are true:
•the product must be TIGHTLY peterto to the surface of the support plate weighing at least 3 kg
When measuring magnetic steels error may increase due to the influence of the magnetic field were on the reading speed of movement of the striker inside the coil.
Modification of the universal hardness tester UCB T
The hardness tester universal UCB T-U1 - ultrasonic hardness tester.
The hardness tester universal UCB T-D1 - dynamic hardness tester.
The hardness tester universal UCB T-UD1 - combined (ultrasonic and dynamic) Durometer.
Modification of the ultrasonic hardness tester T-U1 and hardness dynamic T-1 can be upgraded to a modification of hardness combined T-UD1 by purchasing an activation code and an additional sensor for measuring the hardness of the missing method.
Technical characteristics of the dynamic hardness tester UCB T-D1
The range of hardness measurement
Rockwell, HRC 20 - 70
Brinell HB 90 - 450
Vickers, HV 230 - 940
temporary resistance (tensile strength, MPa 370 - 1740
Basic measurement error:+/- 2%
Overall dimensions, mm Hg
Operating temperature range, ° Honeycomb -5 to + 40
Power supply 2 batteries type AAA
The continuous operation time, hrs, menee
Weight of electronic unit with battery, no more kg,2
The delivery of dynamic hardness tester UCB T-D1
•the electronic hardness tester
•sensor dynamic T-1
•2 rechargeable batteries with charger
•passport user manual
•cables
•packing
Additional options to order
•additional sensors to the hardness tester
•battery
•charger
•set of measures hardness
•rechargeable grinding machine
Designed for rapid non-destructive testing of hardness:
•metals and alloys on standardized in the CIS hardness scales: Rockwell (HRC), Brinell (HB), Vickers (HV);
•metals with different properties from steel (for example, non-ferrous metals, alloys, cast iron and other) with five additional scales for calibration;
•using a scale of tensile strength (Rm) in accordance with GOST 22791-77 to determine the ultimate tensile strength of products made of carbon steel pearlitic class by automatic recalculation on the scale of hardness Brinell (HB);
The dynamic hardness tester implements a method rebound (Liba). Dynamic hardness tester the most simple and inexpensive Durometer of all portable portable hardness testers.
Durometer allows you to measure the hardness of metals and alloys with a weight exceeding 5 kg (without additional operations).
Advantages of dynamic hardness tester UCB T-D1 •
•measure the hardness of materials with heterogeneous, coarse-grained structure, forged products, castings, cast iron
•high performance in the measurement of hardness
•wide range of hardness measurement
•convenience and ease of measurement of hardness
•the minimum number of controls
•graphic display with backlight, monitoring the status of the battery
•automatic detection of the sensors, indication of the type of the connected sensor
Hardness dynamic T-1 is the most accessible metal hardness tester. The hardness tester is simple to set up and easy to operate. The hardness measurement dynamic hardness tester takes no more than 10 seconds, which provides high performance controls in hardness measurements. We must remember that the dynamic hardness tester has a number of restrictions on weight and size of the object of control. For measuring the hardness of the small details we recommend the use of ultrasonic hardness tester.
Hardness dynamic T-1 is the base model hardness tester, there is also an enhanced version of a Durometer T-D2. The Durometer of the T-2 has a memory, the PC communication mode and extended temperature range.
Limitations of dynamic hardness tester UCB T-D1
Measurement items weighing less than 3 kg or thickness less than 12mm is possible only if the following conditions are true:
•the product must be TIGHTLY peterto to the surface of the support plate weighing at least 3 kg
When measuring magnetic steels error may increase due to the influence of the magnetic field were on the reading speed of movement of the striker inside the coil.
Modification of the universal hardness tester UCB T
The hardness tester universal UCB T-U1 - ultrasonic hardness tester.
The hardness tester universal UCB T-D1 - dynamic hardness tester.
The hardness tester universal UCB T-UD1 - combined (ultrasonic and dynamic) Durometer.
Modification of the ultrasonic hardness tester T-U1 and hardness dynamic T-1 can be upgraded to a modification of hardness combined T-UD1 by purchasing an activation code and an additional sensor for measuring the hardness of the missing method.
Technical characteristics of the dynamic hardness tester UCB T-D1
The range of hardness measurement
Rockwell, HRC 20 - 70
Brinell HB 90 - 450
Vickers, HV 230 - 940
temporary resistance (tensile strength, MPa 370 - 1740
Basic measurement error:+/- 2%
Overall dimensions, mm Hg
Operating temperature range, ° Honeycomb -5 to + 40
Power supply 2 batteries type AAA
The continuous operation time, hrs, menee
Weight of electronic unit with battery, no more kg,2
The delivery of dynamic hardness tester UCB T-D1
•the electronic hardness tester
•sensor dynamic T-1
•2 rechargeable batteries with charger
•passport user manual
•cables
•packing
Additional options to order
•additional sensors to the hardness tester
•battery
•charger
•set of measures hardness
•rechargeable grinding machine
