Stationary hardness Brinell UCB TC-B-C1
Offer type: salePublished: 24.03.2014
| Seller: |  Lazarenko Dmitrij |
| Phones: |  (056) 767-05-09 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast', Novomoskovsk |
Designed to measure the hardness of products from alloys, hardened steels and metals under laboratory conditions.
The Brinell Hardness Tester. The main advantages compared with previous models:
•Higher accuracy and performance control;
•Multi-function control system;
•Photo sensor;
•Electronic control system loads;
•High-precision optical module dimension;
•Measuring microscope;
•The possibility of transition between the scales of hardness;
•The availability of user-friendly graphic display.
The versatility and wide range of test loads allows for measuring the hardness of soft metals such as tin, aluminum, lead, and various hardened steel, alloys and castings from non-ferrous metals, bearings made from soft alloys.
For low values of hardness, Durometer, Brines gives a more accurate reading in comparison with the device of Rockwell. Also it is easier to determine the values of the yield strength of controlled material that plays an important role for practical engineering tasks.
Distinctive features of the hardness tester
•measuring microscope
•large graphic display
•easy transition from one hardness scale to another scale of hardness
•automatic control system supply load
•easy management
•the accuracy of the measurements according to GOST 9012-59, B/T 231.2, ISO 6506-2 and ASTM E10
The Brinell hardness tester TC-B-W1 perfectly suitable to determine the hardness of the Brunel initiated the construction of soft steel, cast iron, non-ferrous metals and bearings from soft alloys, etc.
Technical characteristics of the hardness tester
Scale БринелляHBW2.5/62.5、HBW2.5/187.5、HBW5/62.5、HBW5/125、HBW5/250、HBW5/750、HBW10/100、HBW10/250、HBW10/500、HBW10/1000、HBW10/1500、HBW10/3000
Test nagruzke.5kg (612.9 N)、 100kg (980.7 N)、kg N)、187.5 kg (N)、250kg (N)、500kg (N)、750kg (N)、1000kg (N)、1500kg (N)、kg (N)
The range of hardness measurement 8-650 HB
Price delenia.Mm
Increase microscopic
Time izmereniya~60
Exterior razmery×210×750mm(L×W×H)
Wes kg
The maximum height of analyzing processes controle mm
The maximum depth for installation of the object controle mm
Pitanie In
Delivery
•Durometer stationary
•measuring microscope
•indenture with the ball (2.5, 5 and 10 mm)
•large flat table
•small flat table
•V-neck style
•measures of Brinell hardness(3 pieces)
•manual
The Brinell Hardness Tester. The main advantages compared with previous models:
•Higher accuracy and performance control;
•Multi-function control system;
•Photo sensor;
•Electronic control system loads;
•High-precision optical module dimension;
•Measuring microscope;
•The possibility of transition between the scales of hardness;
•The availability of user-friendly graphic display.
The versatility and wide range of test loads allows for measuring the hardness of soft metals such as tin, aluminum, lead, and various hardened steel, alloys and castings from non-ferrous metals, bearings made from soft alloys.
For low values of hardness, Durometer, Brines gives a more accurate reading in comparison with the device of Rockwell. Also it is easier to determine the values of the yield strength of controlled material that plays an important role for practical engineering tasks.
Distinctive features of the hardness tester
•measuring microscope
•large graphic display
•easy transition from one hardness scale to another scale of hardness
•automatic control system supply load
•easy management
•the accuracy of the measurements according to GOST 9012-59, B/T 231.2, ISO 6506-2 and ASTM E10
The Brinell hardness tester TC-B-W1 perfectly suitable to determine the hardness of the Brunel initiated the construction of soft steel, cast iron, non-ferrous metals and bearings from soft alloys, etc.
Technical characteristics of the hardness tester
Scale БринелляHBW2.5/62.5、HBW2.5/187.5、HBW5/62.5、HBW5/125、HBW5/250、HBW5/750、HBW10/100、HBW10/250、HBW10/500、HBW10/1000、HBW10/1500、HBW10/3000
Test nagruzke.5kg (612.9 N)、 100kg (980.7 N)、kg N)、187.5 kg (N)、250kg (N)、500kg (N)、750kg (N)、1000kg (N)、1500kg (N)、kg (N)
The range of hardness measurement 8-650 HB
Price delenia.Mm
Increase microscopic
Time izmereniya~60
Exterior razmery×210×750mm(L×W×H)
Wes kg
The maximum height of analyzing processes controle mm
The maximum depth for installation of the object controle mm
Pitanie In
Delivery
•Durometer stationary
•measuring microscope
•indenture with the ball (2.5, 5 and 10 mm)
•large flat table
•small flat table
•V-neck style
•measures of Brinell hardness(3 pieces)
•manual
