Combined hardness tester UCB T-UD2
Offer type: salePublished: 24.03.2014
| Seller: |  Lazarenko Dmitrij |
| Phones: |  (056) 767-05-09 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast', Novomoskovsk |
Designed for rapid non-destructive testing of hardness:
•metals and alloys on standardized in the CIS hardness scales: Rockwell (HRC), Brinell (HB), Vickers (HV);
•metals with different properties from steel (for example, non-ferrous metals, alloys, cast iron and other) with five additional scales for calibration;
•using a scale of tensile strength (Rm) in accordance with GOST 22791-77 to determine the ultimate tensile strength of products made of carbon steel pearlitic class by automatic recalculation on the scale of hardness Brinell (HB);
Implements methods rebound and ultrasonic contact impedance (UCI) is therefore called the combined hardness tester. The combination of both methods allows control of all products from metals and alloys.
Combined hardness tester T-UD2 favorably with similar hardness testers the presence of memory, PC, cold-resistant performance and low cost.
Advantages of the universal hardness tester UCB T-UD2:
•2 removable sensor: ultrasonic and dynamic
•no restrictions when testing hardness (mass, configuration, structure, degree of mechanical and thermal treatment, and others)
•measures the change in the hardness of the hardened layer depth of the product and the effect of surface stress
•wide range of hardness measurement
•convenience and ease of measurement
•the minimum number of controls
•graphic display with backlight
•automatic sensor recognition
•indication of the type of connected sensor
•monitoring the status of the battery
•extended temperature range (hardy to -20 degrees Celsius indicator)
•the presence of internal memory and a communication channel with PC
•new, intuitive menu with tooltips on buttons
Combined hardness tester is the most versatile instrument from a number of portable hardness testers. Choosing a combined hardness tester T-UD2 you will receive a universal hardness tester for measuring hardness of metals and alloys, the hardness of various components and tools. The use of two methods of measuring the hardness allows you to control the hardness as bulky items, and parts small in size and weight. Combined hardness tester T-UD2 has a younger model - hardness combined T-UD1. Durometer T-UD1 cheaper, but it has no memory and PC communication. Technical characteristics of the hardness tester T-UD1 and Durometer T-UD2 identical.
Specifications
The range of hardness measurement
Rockwell, HRC 20 - 70
Brinell HB 90 - 450
Vickers, HV 230 - 940
temporary resistance (tensile strength, MPa 370 - 1740
Basic measurement error:+/- 2 HRC units;
+/- Ed. HB
Overall dimensions, mm Hg
Operating temperature range, ° Honeycomb -20 to + 40
Power supply 2 battery type AA
The continuous operation time, hrs, 20
Weight of electronic unit with battery, no more kg,2
Delivery
•electronic unit
•ultrasonic sensor
•dynamic sensor (type - by agreement with the buyer)
•2 rechargeable batteries with charger
•passport user manual
•cables
•packing
•metals and alloys on standardized in the CIS hardness scales: Rockwell (HRC), Brinell (HB), Vickers (HV);
•metals with different properties from steel (for example, non-ferrous metals, alloys, cast iron and other) with five additional scales for calibration;
•using a scale of tensile strength (Rm) in accordance with GOST 22791-77 to determine the ultimate tensile strength of products made of carbon steel pearlitic class by automatic recalculation on the scale of hardness Brinell (HB);
Implements methods rebound and ultrasonic contact impedance (UCI) is therefore called the combined hardness tester. The combination of both methods allows control of all products from metals and alloys.
Combined hardness tester T-UD2 favorably with similar hardness testers the presence of memory, PC, cold-resistant performance and low cost.
Advantages of the universal hardness tester UCB T-UD2:
•2 removable sensor: ultrasonic and dynamic
•no restrictions when testing hardness (mass, configuration, structure, degree of mechanical and thermal treatment, and others)
•measures the change in the hardness of the hardened layer depth of the product and the effect of surface stress
•wide range of hardness measurement
•convenience and ease of measurement
•the minimum number of controls
•graphic display with backlight
•automatic sensor recognition
•indication of the type of connected sensor
•monitoring the status of the battery
•extended temperature range (hardy to -20 degrees Celsius indicator)
•the presence of internal memory and a communication channel with PC
•new, intuitive menu with tooltips on buttons
Combined hardness tester is the most versatile instrument from a number of portable hardness testers. Choosing a combined hardness tester T-UD2 you will receive a universal hardness tester for measuring hardness of metals and alloys, the hardness of various components and tools. The use of two methods of measuring the hardness allows you to control the hardness as bulky items, and parts small in size and weight. Combined hardness tester T-UD2 has a younger model - hardness combined T-UD1. Durometer T-UD1 cheaper, but it has no memory and PC communication. Technical characteristics of the hardness tester T-UD1 and Durometer T-UD2 identical.
Specifications
The range of hardness measurement
Rockwell, HRC 20 - 70
Brinell HB 90 - 450
Vickers, HV 230 - 940
temporary resistance (tensile strength, MPa 370 - 1740
Basic measurement error:+/- 2 HRC units;
+/- Ed. HB
Overall dimensions, mm Hg
Operating temperature range, ° Honeycomb -20 to + 40
Power supply 2 battery type AA
The continuous operation time, hrs, 20
Weight of electronic unit with battery, no more kg,2
Delivery
•electronic unit
•ultrasonic sensor
•dynamic sensor (type - by agreement with the buyer)
•2 rechargeable batteries with charger
•passport user manual
•cables
•packing
