Calibrator controller pressure Metran-530
Offer type: salePublished: 27.03.2014
| Seller: |  Vigovskij Igor' |
| Phones: |  +7(351) 725-66-55 Show phone721-86-15 Show phone |
| Address: | Russian Federation, Chelyabinsk, Chelyabinsk |
Measuring ranges-play:
gauge pressure 0...2,0 MPa;
pressure-vacuum to-0.1...2.0 MPa
Measurement error ±0,025 0,05...%
The instability of the pressure regulating ±0,002%FS
Units of pressure measure are: PA, kPa, MPa, bar, mbar, kg/cm2, mm of water. Art., mm RT. article
The possibility of maintaining extremely low pressure (100 PA)
The ability to create high-precision automated systems for testing LED when working with external pressure modules Metran-518 or other reference means
Built-in power supply 24 V for calibration of pressure sensors
RS232 interface
Included in the state register of measuring instruments under No. 43457-09, certificate # 38676
Calibrator controller pressure Metran-530 is designed for accurate measurement and automated playback gauge pressure, vacuum pressure-vacuum.
Used as a reference (precision pressure gauge and controller) in the verification and calibration of pressure sensors, differential pressure, vacuum pressure-vacuum technical and reference gauges and so on; to check the pressure switch, etc.
Functionality:
measurement-playback-pressure (rarefaction);
setting and keeping arbitrary values of pressure within the operating range with high stability;
basic, semi-automatic and automatic modes of operation;
leak test the leak detection system;
built-in self-test electrical and pneumatic systems.
gauge pressure 0...2,0 MPa;
pressure-vacuum to-0.1...2.0 MPa
Measurement error ±0,025 0,05...%
The instability of the pressure regulating ±0,002%FS
Units of pressure measure are: PA, kPa, MPa, bar, mbar, kg/cm2, mm of water. Art., mm RT. article
The possibility of maintaining extremely low pressure (100 PA)
The ability to create high-precision automated systems for testing LED when working with external pressure modules Metran-518 or other reference means
Built-in power supply 24 V for calibration of pressure sensors
RS232 interface
Included in the state register of measuring instruments under No. 43457-09, certificate # 38676
Calibrator controller pressure Metran-530 is designed for accurate measurement and automated playback gauge pressure, vacuum pressure-vacuum.
Used as a reference (precision pressure gauge and controller) in the verification and calibration of pressure sensors, differential pressure, vacuum pressure-vacuum technical and reference gauges and so on; to check the pressure switch, etc.
Functionality:
measurement-playback-pressure (rarefaction);
setting and keeping arbitrary values of pressure within the operating range with high stability;
basic, semi-automatic and automatic modes of operation;
leak test the leak detection system;
built-in self-test electrical and pneumatic systems.
