StructureMap-coercimeter UCB RRC-M
Offer type: salePublished: 27.03.2014
| Seller: |  Lazarenko Dmitrij |
| Phones: |  (056) 767-05-09 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast', Novomoskovsk |
StructureMap - coercimeter RRC-M is designed for non-destructive quality control of thermal, thermomechanical or chemical thermal treatments, as well as the determination of hardness and mechanical properties of parts made of ferromagnetic materials in the presence of correlation between the controlled and measured parameters. The device can be used for sorting metals steel grades and inspection of the surface layers of ferromagnetic materials.
The Converter is attached to the electromagnet with a removable pole pieces and with the built in its magnetic circuit with a Hall sensor.
The operation principle of this device is the magnetization of the controlled area of the sheet with the subsequent demagnetization his growing field, fixation of the field strength corresponding to the coercive force of the material of the workpiece, and measuring the amplitude of the signal from the Hall sensor.
StructureMap (coercimeter) allows to estimate the stress-strain state (SSS) of the structure and the degree of fatigue of the metal of the coercive force.
Main field of application is the control of VAT and residual life of metal lifting devices (cranes, hoists and lifts), pipelines, boilers, pressure vessels, etc. as well as traditional non-destructive testing of mechanical properties of steel products and technologies in metallurgy and mechanical engineering.
Coercimeter RRC-M used for the control of VAT and residual life of metal lifting devices (cranes, hoists and lifts), pipelines, boilers, pressure vessels, etc. as well as traditional non-destructive testing of mechanical properties of steel products and technologies in metallurgy and mechanical engineering.
Distinctive features of StructureMap - coercimeter RRC-M
•Inverter with additional display and control buttons basic functions
•Automatic alarm about defects
•Automatic alarm marriage when the result is outside the specified boundaries
•Tolerance control
•Averaging up to 99 results
•Memory: 5000 measurements (50 files 100 results can be viewed on the screen of the device or transfer to PC
•The opportunity for the input of additional scales
•Calibration mode basic and supplementary scales
Main technical characteristics of StructureMap - coercimeter RRC-M
Basic measurement modes Measurement of the coercive force
The current measurement
Measurement code (conventional units)
Additional scale for calibration
The measurement range of the coercive force, A/cm (a/m) 1-40,0 (100-4000)
The duration of the measuring cycle, with no more than 5
The magnetization pulse
Additional scale for calibration, PCs 7
Food built-in Li-Ion battery
Time of Autonomous work, hours, not less than 8
The size of the electronic unit mm 270*230*70
The size of the Converter, mm 200*170*70
Delivery
•Electronic unit StructureMap - coercimeter
•Built-in Li-Ion battery
•Converter
•AC adapter / charger
•Cable for PC connection
•Software for PC
•Documentation: user manual
•Carrying case(pouch) for carrying
The Converter is attached to the electromagnet with a removable pole pieces and with the built in its magnetic circuit with a Hall sensor.
The operation principle of this device is the magnetization of the controlled area of the sheet with the subsequent demagnetization his growing field, fixation of the field strength corresponding to the coercive force of the material of the workpiece, and measuring the amplitude of the signal from the Hall sensor.
StructureMap (coercimeter) allows to estimate the stress-strain state (SSS) of the structure and the degree of fatigue of the metal of the coercive force.
Main field of application is the control of VAT and residual life of metal lifting devices (cranes, hoists and lifts), pipelines, boilers, pressure vessels, etc. as well as traditional non-destructive testing of mechanical properties of steel products and technologies in metallurgy and mechanical engineering.
Coercimeter RRC-M used for the control of VAT and residual life of metal lifting devices (cranes, hoists and lifts), pipelines, boilers, pressure vessels, etc. as well as traditional non-destructive testing of mechanical properties of steel products and technologies in metallurgy and mechanical engineering.
Distinctive features of StructureMap - coercimeter RRC-M
•Inverter with additional display and control buttons basic functions
•Automatic alarm about defects
•Automatic alarm marriage when the result is outside the specified boundaries
•Tolerance control
•Averaging up to 99 results
•Memory: 5000 measurements (50 files 100 results can be viewed on the screen of the device or transfer to PC
•The opportunity for the input of additional scales
•Calibration mode basic and supplementary scales
Main technical characteristics of StructureMap - coercimeter RRC-M
Basic measurement modes Measurement of the coercive force
The current measurement
Measurement code (conventional units)
Additional scale for calibration
The measurement range of the coercive force, A/cm (a/m) 1-40,0 (100-4000)
The duration of the measuring cycle, with no more than 5
The magnetization pulse
Additional scale for calibration, PCs 7
Food built-in Li-Ion battery
Time of Autonomous work, hours, not less than 8
The size of the electronic unit mm 270*230*70
The size of the Converter, mm 200*170*70
Delivery
•Electronic unit StructureMap - coercimeter
•Built-in Li-Ion battery
•Converter
•AC adapter / charger
•Cable for PC connection
•Software for PC
•Documentation: user manual
•Carrying case(pouch) for carrying
