The equipment for manufacture of LEGO bricks in Ukraine.

The LEGO Brick

Brick LEGO building brick, shaped like a meccano company "Lego".

He yzhotavlyvaetsya when hyperpressure product resulting from the sieving of the crushed stone fractions and passing through a special sieve, and has special grooves formation. Thanks to these slots, the construction process will be very quick.

Features LEGO bricks:

strength - 150 M,
the density of 1550 kg/m3,
frost - 35 cycles (for harsh climatic conditions can improve the characteristics).

The advantages are obvious even to a layperson. Due to the presence of grooves to lay them faster and easier. Existing holes can be used for electric wiring. The weight of the LEGO brick is smaller than in other species.

The manufacture of LEGO bricks does not require firing, which greatly reduces the cost. Instead of firing is a strong pressing, which gives strength. It has not only a different color and shades of colors, but a variety of textures.

Thanks to hyperpressure this brick can be attributed to the kind of artificial stone. It can be successfully used for cladding buildings. And high strength allows you to upload not only partitions, but the load-bearing walls.

As raw materials for LEGO bricks are suitable waste crushing limestone, volcanic dust or sand. The less the fraction of the feedstock, the higher the quality of the brick. If the raw material consists of fairly large particles, it can be crushed - then the quality of the brick will not be worse.

The LEGO brick

Masonry does not require special skills enough to lay out the first layer, and then the process goes fairly quickly. Because of the available slots and studs they are perfect for each other. The coupling layer is not a traditional solution, and using a special glue that can be applied by brush or roller. Use glue will not only reduce costs, but does not require much physical exertion as in the preparation of cement mortar. And the wall will look aesthetically pleasing.