Tub long pasteurization SDT-600
Offer type: salePublished: 03.03.2016
| Price: | 74 000 UAH |
| Company: | OOO'DAMIZ' |
| Seller: |  Yurij |
| Phones: |  0663813100 Show phone |
| Address: | Ukraine, Poltavs'ka Oblast', Poltava |
Bath of long pasteurisation, is intended for heat treatment by mixing milk, dairy blends, dairy by-products.
Bath consists of the following main components: bathtubs, piping and control Cabinet.
Tub long pasteurization consists of a stainless inner tubs that is enclosed in the housing and an outer cladding.
Bathtub placed under internal steam distribution head, to which is supplied through the conduit pairs.
From annular spaces down put the pipe to drain the water. Attached to it the valve and the pipe feeding the cold water. To maintain a constant water level between the walls serve as the overflow pipe.
Mixing of product in the tub long pasteurization is carried out by a stirrer rotated by a motor-reducer. The change control of product temperature, the water in annular space is performed by using thermometers.
Bath consists of the following main components: bathtubs, piping and control Cabinet.
Tub long pasteurization consists of a stainless inner tubs that is enclosed in the housing and an outer cladding.
Bathtub placed under internal steam distribution head, to which is supplied through the conduit pairs.
From annular spaces down put the pipe to drain the water. Attached to it the valve and the pipe feeding the cold water. To maintain a constant water level between the walls serve as the overflow pipe.
Mixing of product in the tub long pasteurization is carried out by a stirrer rotated by a motor-reducer. The change control of product temperature, the water in annular space is performed by using thermometers.
- the three-layer capacity 600 l (Zh.) with thermal insulation, conical bottom, heating elements 45 Il for your order kW (9x5 or 3х15 kW);
- overflow pipe, 1/3 of the lid lift;
- the sensor FCM in the product;
- DN50 stainless faucet;
- mixing device frame type with Teflon scrapers;
- gear motor 1,5 kW, 28 rpm, with ground reference node;
- remote control, including 2-way or 1-channel meter controller;
- the starter mixing device;
- system for protection of heating elements;
- the solenoid valve on the steam inlet;
