The separator A1-OTSM-10 milk cleaner
Offer type: salePublished: 12.03.2016
| Company: | NPF 'MAGNA' |
| Seller: |  Ivanova Oksana Anatol'evna |
| Phones: |  0503278145 0677906733 Show phone |
| Address: | Ukraine, Poltavs'ka Oblast', Poltava |
Separators GCMS are used for continuous cleaning of warm milk from impurities and milk slime with partial pulsating centrifugal discharge of sediment. Used on medium and large enterprises of the dairy industry. Can work as part of the pasteurization-cooling units.
Separators can be applied for clarification of similar products in other industries.
Mud space is cleaned periodically during operation. Depending on the degree of contamination of the milk the time between unloading varies between 40...85 min, and the duration of discharge 0,3...0,7 S.
The initial product of the milk through characterzation is fed into the drum and fills mesterolone space. Under the action of centrifugal force and mechanical impurities, and slime, as heavier, move to the periphery and are deposited in a mud space. Purified milk outer channels characteriatics rises up and through the holes in the lid of the drum flows into the pressure chamber from which pressurized output disk via closed pipelines in industrial communications
Technical characteristics A1-OTSM-10:
Performance, h/l, 10000
The drum rotation frequency, Rev/min, 6500
Maximum drum diameter, mm 405
The number of plates in the drum pieces, 53
Mesterolone clearance, mm, 0,7
The product pressure at the outlet, MPa, 0,3
Motor:
Power, kW, 7.5
The Voltage, V, 380
Rotation frequency, Rev/min., 1550
The temperature of the separation, S, of 35-40
Overall dimensions, mm
Length 1375
Width 880
The altitude of 1210
Weight, kg 470
Separators can be applied for clarification of similar products in other industries.
Mud space is cleaned periodically during operation. Depending on the degree of contamination of the milk the time between unloading varies between 40...85 min, and the duration of discharge 0,3...0,7 S.
The initial product of the milk through characterzation is fed into the drum and fills mesterolone space. Under the action of centrifugal force and mechanical impurities, and slime, as heavier, move to the periphery and are deposited in a mud space. Purified milk outer channels characteriatics rises up and through the holes in the lid of the drum flows into the pressure chamber from which pressurized output disk via closed pipelines in industrial communications
Technical characteristics A1-OTSM-10:
Performance, h/l, 10000
The drum rotation frequency, Rev/min, 6500
Maximum drum diameter, mm 405
The number of plates in the drum pieces, 53
Mesterolone clearance, mm, 0,7
The product pressure at the outlet, MPa, 0,3
Motor:
Power, kW, 7.5
The Voltage, V, 380
Rotation frequency, Rev/min., 1550
The temperature of the separation, S, of 35-40
Overall dimensions, mm
Length 1375
Width 880
The altitude of 1210
Weight, kg 470
